Supplies Needed:
Tube of choice, I am using PinUpToons, you can find his awesome work at CDO now
Scrap kit Faery Whispers by Randy’s Sin
Plugin dsb flux - Bubbles (optional)
Plugin MuRa’s Meister - Copies (optional)
Animation of choice, I used one from Love Shack (she has a lot of choose from!!)

Open a new image 600 by 250 with a white background.

Copy and paste a paper of choice above the white background. Go to dsb flux - Bubbles, the settings I used were all set to 50.

Copy and paste the tube as a new layer. Go to Effects - MuRa’s Meister - Copies
I used these following settings:
Wallpaper (perspective)
Line
Tile
Behind
Number - 20
Shift X and Y - 50
Rest are the default settings.
Change the Blend Mode to Overlay

Open Magic 3, resize by 60 percent. Copy and paste as a new layer placing in the upper right hand corner.

Open Fairy Flowers 1, resize by 40 percent. Copy and paste as a new layer placing in the right hand side. Apply a drop shadow.

Using the Selection Tool draw out a rectangle about in the center of the tag. I used a color to match the tag. I then apply a gradient glow. You can add just a drop shadow if you like. This layer should be above the other layers.

Duplicate the flower and place on the left hand side above the rectangle.

Copy and paste the tube as a new layer. Resize if needed, place more on the left hand side. Duplicate, on the bottom tube layer go to Adjust - Blur - Gaussian Blur and I used 3. Select the top tube layer and apply a drop shadow.

Open Magic 6, copy and paste as a new layer. Place at the bottom of the tag to your liking. Apply a drop shadow.

Next we are going to add the frame. Make a gradient out of two colors from the tag. Select the white background layer, go to Selections - Select All - Float - Defloat. Back to Selections - Modify - Select Selection Border and set to 6. Add a new layer above the rest. Flood fill this layer with the gradient. Do this again only this time change the 6 to 8 and flood fill with white, move this layer below the gradient frame layer. Apply a drop shadow to both layers.

Add any copyrights and your name. if you are not animating save as a PNG.

Onto Animation!!

Open Animation Shop and the animation you are adding to the tag.

In PSP, leave all layers visible except for the frame layers. Copy MERGED and go to Animation Shop. Copy and paste as a new animation. Check the bling for the number of frames it contains, copy the tag so it has just as  many frames as a the bling.

Once you have done this, Select All frames in the tag, Select All frames in the bling. Make sure Propagate Paste is selected, you can find this under the Edit menu.

Making sure that you have the first frame in both selected drag the bling frame up into the tag, place to your liking. Check animation, like it? AWESOME!

Okay, back to PSP! Close off the layers except for the frame layers, copy MERGED.

Now back to Animation Shop, sorry about the dizzy feeling! LOL… paste the frame as a new animation. Check to make sure all frames are selected in the tag, now drag the frame into the tag, again this should be the first frame in the tag. Look good??? Check out the animation, like it? GREAT!! Save as a .gif.

Your FINISHED!!! YAHOO!!! LOL.

To make the avatar do the same as you done for the tag. Only open an image 150 x 150.

Thank you for trying one of my tuts, I hope it was fun and you come back for more!! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using Deborah Grieves found at PTE
Scrap kit No Apologies by Vix
My Supplies (mask , frame and moon) here

Open a new image 700 x 700 with a white background.

Copy and paste the frame included in my supplies as a new layer. Click inside the frame with the Magic Wand, go to Selections - Modify - Expand by 8.

Copy and paste a paper of choice below the frame layer. Position to your liking. Go to Selections - Invert and hit delete on the keyboard.

Copy and paste the mask included in my supplies as a new layer, move this layer above the white background.

Copy and paste the tube as a new layer. Place on top of the frame, erase any of the tube you don’t want showing. Apply a drop shadow.

Copy and paste the moon included in my supplies as a new layer, place in the upper left hand corner inside the frame. Erase any of the moon that’s out past the frame.

Open Element 13, copy and paste as a new layer, place at the bottom of the frame, erase any of the glitter that you don’t want on the tube. Apply a drop shadow. Duplicate and place at the top of the frame.

Open Element 12, resize by 60 percent, copy and paste as a new layer. Place just above the frame background. Position inside the frame to your liking.

Open Element 4, resize by 80 percent. Copy and paste as a new layer. Place under the frame at the bottom of the tag. Apply a drop shadow. Duplicate and place to your liking around the frame. Erase any of the ribbon you do not want showing.

Open Element 11, resize by 80 percent. Copy and paste as a new layer. Place across the bottom of the tag, apply a drop shadow or Gradient Glow.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you have enjoyed using it and look forward to seeing ya back here again! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using a FTU artist Lindsay Archer
My supplies (tubes) here
Penta.com - Dot and Cross
MuRa’s Meister - Copies
dsb flux - Bubbles
Animation of choice, I am using one done by Scrappy Bit Of Fun, you can choose one of your liking, she has MANY!
Animation Shop if animating

Open a new image 600 x 250 with a white background.

Add a new layer above the white background, select two colors from the tubes. Make a gradient of your choice, flood fill this layer.

Open the tube Shy Drat (Pretty_N_Pink), it will be a dragon. Resize by 80 percent. Paste as a new layer. Go to Effects and find the Plugin MuRa’s Meister - Copies, I used these settings:
Wallpaper (Rotate)
Random
Wraparound
Blend Mode
Number - 20
Shift X - 50
Shift Y - 50
Rest is left on default settings.

On the same layer, go to Effects - dsb flux and select Bubbles, the settings I used was all set on 50. Change the Blend Mode to Luminance (legacy).

Select the Preset Shape tool, find the rectangle. Draw out a rectangle of a good size near the bottom of the tag using the gradient you flood filled the background with. Convert to Raster layer, go to Effects - Penta.com - Dot and Cross, here is the settings I used on the rectangle:
Amount - 72
Cross Distance - 10
Cross Width - 2
Apply a drop shadow after you have applied the plugin.

Repeat the above steps two more times, only each time make the rectangle a little smaller than the last one.

Using a nice font of choice, type out the word BELIEVE across the top rectangle.

Copy and paste the fairy tube as a new layer. Place in the lower right hand side or to your liking depending on how you want it. Apply a drop shadow.

Now for the frame, pick a nice gradient of choice that will match the tag. Select the WHITE background layer, go to Selections - Select All - Float - Defloat. Back to Selections - Modify - Select Selection Borders, these are the settings I used:
Both Sides - Checked
Anti-Alias - Checked
Border Width - 5

Add a new layer above the others, flood fill this layer with the gradient. Go to Effects - Edge Effects and apply Enhance. Apply a drop shadow.

Add any copyrights and your name.

Onto Animation! Open Animation Shop. Also open the bling you are adding to the tag. If not save now!

In PSP, close these layers: fairy, frame, credits IF they are on top of the fairy.

You should have visible: the background, the gradient background, the rectangles, and the word art. Copy these layers MERGED.

Pull up Animation Shop, copy and paste as a new animation. Check the bling for the number of frames it contains, copy the tag so it has just as  many frames as a the bling.

Once you have done this, Select All frames in the tag, Select All frames in the bling. Make sure Propagate Paste is selected, you can find this under the Edit menu.

Making sure that you have the first frame in both selected drag the bling frame up into the tag, place to your liking. Check animation, like it? AWESOME!

Okay, back to PSP! Close off the layers we have open and open those we have closed…lol. Should have the fairy, frame and credits depending on where you placed them. Once they are open and the rest closed, copy MERGED.

Now back to Animation Shop, sorry if your getting dizzy! LOL… paste the frame and fairy as a new animation. Check to make sure all frames are selected in the tag, now drag the frame and fairy into the tag, again this should be the first frame in the tag. Look good??? Check out the animation, like it? GREAT!! Save as a .gif.

Your FINISHED!!! Whoop Whoop!! LOL.

To make the avatar do the same as you done for the tag. Only open an image 150 x 150.

Thank you for trying one of my tuts, I hope it was fun and you come back for more!! I would love to see what you have created.