Supplies Needed:
Tube of choice (I used 3 different sizes), I am using Keith Garvey found at PTE
Scrap kit Let The Music Play by Rebellious Scraps, you can find this kit at Scrappin Dollars
Template CMTEM 3 by Tamie found at the Creative Misfits blog
Eyecandy 4000 - Gradient Glow
Xero - Porcelain, Soft Mood and Soft Vignette

Open the template, duplicate and close the original. Delete the copyright and word art. Resize all layers by 85 percent. Resize canvas 700 x 700.

Select Raster 2, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer, position to your liking. Go to Selections - Invert and hit delete on the keyboard.

Repeat the above steps for the remaining template layers.

Select the background for the large circle, go to Selections - Select All - Float - Defloat.

Copy and paste the close-up tube as a new layer. Place to your liking, go to Selections - Invert and hit delete on the keyboard. Find Xero - Soft Mood and apply using the default settings.

Select the background for the rectangle on the left hand side, go to Selections - Select All - Float - Defloat.

Copy and paste the smallest tube as a new layer. Place to your liking, go to Selections - Invert and hit delete on the keyboard. Find Xero - Soft Vignette and apply using the default settings.

Select the background for the rectangle on the right hand side, go to Selections - Select All - Float - Defloat.

Copy and paste the smallest tube as a new layer. Place to your liking, go to Selections - Invert and hit delete on the keyboard. Find Xero - Porcelain and apply using the default settings.

Open Wire 2, resize by 60 percent. Copy and paste as a new layer. Place in the bottom right hand corner, move this layer above the mask layer. Apply a drop shadow. Duplicate and mirror and move to the left hand side. Duplicate and place on the left hand side near the top. Duplicate once more and do the same for the right side.

Open Music Notes 2, resize by 60 percent. Copy and paste as a new layer, apply a white gradient glow. Position at the top of the template behind the large circle. Apply a drop shadow.

Open Frame 4, resize by 60 percent. Copy and paste as a new layer. Place on the left hand side below the background with the tube. Apply a drop shadow. Duplicate and mirror. Place in the same manner on the right hand side.

Select the bottom strip at the bottom of the template, using a font of choice type out LET THE MUSIC PLAY. Duplicate and move to the other end.

Copy and paste the tube as a new layer. Place in the center of the template below the strips at the bottom. Resize if needed and apply a drop shadow.

Open Music Notes, resize by 60 percent, copy and paste as a new layer, apply a white gradient glow. Place at the bottom of the tube, I have mine on top of the guitar. Apply a drop shadow.

Open Speaker, resize by 50 percent. Copy and paste as a new layer. Place on the left hand side behind the strip and to the left. Apply a drop shadow. Duplicate and mirror, place on the right hand side in the same manner.

Open Compact Disc 1, resize by 12 percent. Copy and paste as new layer, place behind the strip to the right, apply a drop shadow.

Open Compact Disc 2, resize by 10 percent. Copy and paste as a new layer. Place on top of the strip and overlapping the CD we just added, apply a drop shadow. Duplicate and position on the left hand side behind the strip.

Open Pick, resize by 30 percent. Copy and paste as a new layer. Place in the middle of the template at the bottom. Apply a drop shadow.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you have enjoyed yourself and I do look forward to having you back here again! I would love to see what you created.

Supplies Needed:
Tube of choice, I am using Lynn Rider found at ART
Scrap kit Feel The Beat by Abstract Creations also at ART
Template CMTEM 1 by Tamie
Mask of choice

Open the template, resize by 90 percent. Delete the copyright and Group Raster 14.

Select Raster 11, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer, position to your liking, go to Selections - Invert and hit delete on the keyboard. Delete the template layer.

Repeat the above steps for the remaining template layers. For some of the layers I used a gradient from the kit.

Select the background for the star, go to Selections - Select All - Float - Defloat.

Copy and paste the tube as a new layer above the background, position to your liking, resize tube if needed. Go to Selections - Invert and hit delete on the keyboard. Change the Blend Mode to Screen.

Select the background for the small rectangle at the top right, go to Selections - Select All - Float - Defloat.

Copy and paste the tube as a new layer above the background, position to your liking, resize tube if needed, I also mirrored the tube this time. Go to Selections - Invert and hit delete on the keyboard. Change the Blend Mode to Luminance (L).

Apply a drop shadow to rest of the layers.

Open el23, copy and paste as a new layer. Place at the top of the large circle on the left hand side. Apply a drop shadow.

Open el33, resize by 60 percent. Copy and paste as a new layer. Place at the top of the star we added the tube to. Select the notes, go to Selections - Select All - Float - Defloat. Add a new layer above the selected layer and flood fill with a gradient to match the tag. Delete the black note and apply a nice gradient glow or drop shadow.

Open el29, resize by 75 percent. Copy and paste as a new layer. Place on the right hand side next to the star. Apply a drop shadow, duplicate, mirror and place on the left hand side below the city.

Open el28, resize by 80 percent. Copy and paste as a new layer. Place at the top of the template. Apply a drop shadow.

Open el17, resize by 30 percent. Copy and paste as a new layer. Place on the right hand side overlapping the top of the square with the tube, apply a drop shadow.

Copy and paste the tube as a new layer, place to your liking, resize if needed. Apply a drop shadow.

Open el4, resize by 40 percent. Copy and paste as a new layer. Place on the left hand side in front of the tube. Apply a drop shadow.

Add a new layer above the background layer, flood fill this layer with a gradient of choice, apply the mask to this layer. Delete the mask layer and merge group.
Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you had fun and I look forward to having you back here again. I would love to see what you created.

Supplies Needed:
Tubes of choice (regular and close-up), I am using the talented Ismael Rac which you can find here
Scrap kit DJ by Addictive Pleasures

All set to begin, cool lets get this thing started...lol.

Open a new image 700 x 700 with a white background, we will crop later so don't worry about the size for now.

Open frame 3, copy and paste as a new layer. Select the Magic Wand and click inside the frame. Go to Selections - Modify - Expand by 5

Open a paper of choice, resize if desired. Copy and paste as a new layer below the frame layer. Once happy with your paper go to Selections - Invert and hit delete on your key board.

Apply a drop shadow to the frame layer.

Copy and paste the close-up as a new layer inside the frame. Erase any of the tube out past the frame. Apply a dro shadow. Change the opacity to around 60.

Go to Image - Resize and resize all layers by 90 percent. Now go back to Image - Canvas and resize the canvas by 700 x 700 (make sure your on the white background layer).

Open Wire and copy and paste as a new layer above the white background layer. Place in the upper left hand corner. Apply a drop shadow. Duplicate, mirror and flip.

Open Ribbon 2, copy and paste as a new layer above the wire layer. Place in the upper left corner. Apply a drop shadow.

Open Glitter 2 and resize by 60 percent, sharpen. Position to your liking in the right hand corner, once happy with placement move this layer below the wire layer. Apply a drop shadow. Duplicate, flip and mirror. Re-posisiton if needed.

Copy the other tube and paste as a new layer, I resized the one I used by 90 percent. Place on the left side side. Once your happy, duplicate, move this layer below the one duplicated. Go to Adjust - Blur - Gaussian Blur and set the Radius at 3.00. Apply a drop shadow. Also apply a drop shadow on the other tube.

Open DJMixer and resize by 40 percent. Copy and paste as a new layer. Place on top of her bent leg or if using another tube place wherever you like. Apply a drop shadow.

Open Speaker and resize by 40 percent. Copy and paste as a new layer. Place behind the tube off to the left a little bit. Apply a drop shadow.

Open MusicNotes 2 and resize by 60 percent, sharpen. Copy and paste as a new layer. Place on top of the DJMixer. Apply a drop shadow.

Open CD 2 and resize by 20 percent. Copy and paste as a new layer. Place in front of the DJMixer towards the right. Apply a drop shadow. Duplicate, and place overlapping the cd we just added.

Open Star and resize by 50 percent, go to Image - Free Rotate and rotate 8 degrees left, sharpen. Copy and paste as a new layer. Place on the right lower corner of the frame. Apply a drop shadow.

Open Record 2 and resize by 25 percent. Copy and paste as a new layer. Place in the upper right hand corner of the frame. Apply a drop shadow. Duplicate, move behind the frame close to the center.

Open Record 3 and resize by 20 percent. Copy and paste as a new layer. Place overlapping the bottom of the record we just added. Apply a drop shadow. Duplicate, move to the lower right corner behind the frame.

Open Stars and resize by 60 percent. Copy and paste as a new layer. Place in the top right corner of the tag. Apply a drop shadow.

Open Sparkles and resize by 60 percent. Copy and paste as a new layer on top of the close-up.

Add any copyrights and your name.

Crop, resize if desired.

Save as a PNG.

Pretty easy, huh...lol. I hope you have enjoyed using one of my tuts. I would love to see what you have created.

Supplies Needed:
PSP or something like it
Tube of choice, I am using one of Ismael Rac you can find him here
Scrap kit Punk Rock by Felice found here
Template by Deb & Kristin Template 3 at Creative Misfits
Eyecandy 4000 (gradient glow) Optional
Mask of choice

Ready?
Great let begin.

Open the template and duplicate, close the original one.

Delete the copyrights.

I resized the canvas size to 700 X 700 for more room to work, you can always crop and resize when we are finished.

Select the black oval, go to Effects - Add Noise - and use the following settings:
Gaussian checked
Noise - 100
Monochrome checked
Apply a drop shadow of your liking.

Select the pink oval, go to Selections - Select All - Float - Defloat - Invert

Select a paper from the scrap kit or use FOPinkPlaid2 as I did. Resize by 80 percent, paste as a new layer. hit delete on your key board. Apply a drop shadow of your liking.

Delete the pink oval template layer.

Select the blue square, go to Selections - Select All - Float - Defloat - Invert

Select a paper from the scrap kit or use FOPinkDots as I did. Resize by 80 percent, paste as a new layer. hit delete on your key board. Apply a drop shadow of your liking.

Delete the blue square template layer.

Select the black square, go to Selections - Select All - Float - Defloat - Invert

Select a paper from the scrap kit or use FODiagonalPlaid as I did. Resize by 50 percent, paste as a new layer. hit delete on your key board. Apply a drop shadow of your liking.

Delete the black square template layer.

Select the rectangle, go to Selections - Select All - Float - Defloat - Invert

Select a paper from the scrap kit or use FOPinkDots as I did. Paste as a new layer and position to your liking, I used the top of the paper. Hit delete on your key board. Apply a drop shadow of your liking.

Delete the rectangle template layer.

Apply a small gradient glow to the white glitter layer.

Apply the same small gradient glow to the 2 pink dotted lines.

Select the word art, using color #d72f7c select the color charger tool and flood the pink in the lettering or use Hue and Saturation with these settings:
H 236
S 173
L 131

Select the flame layer, go to Effects - Hue and Saturation - Colorize
H 236
S 173

Select the word art again and allpy a small gradient glow, or use a drop shadow of your liking.

Select the black rectangle go to Selections - Select All - Float - Defloat - Invert

Below this layer paste a copy of your tube position to your liking and hit delete on your key board. Lower the opacity to 57.

Merge the music notes with the word art and move to the top of the template. See my tag for reference if needed.

Copy and paste your tube as a new layer, I resized mine by 90 percent and mirrored it. Apply a drop shadow to your tube.

Above the white background layer paste the FOChickenWire, apply your mask to this layer. Apply a drop shadow to this layer. Position to your liking, duplicate, mirror and flip, position again to your liking.

Select FOScullToy, resize by 50 percent twice, go to Adjust and apply sharpen. Position to the right of your tag, line it up so it looks like its hanging on the wire. Erase a small section so it looks like its dangling of the wire. See my tag for reference if needed. Apply a drop shadow if needed.

Open FOFlairButton3, resize by 30 percent and then again by 70 percent, sharpen if needed. Paste as a new layer and position to the left of your tag. Apply a drop shadow. See my tag for reference if needed.

You are more than welcome to add any other embellishments you like.

Add your copyrights.

Add your name.

Crop to your liking and resize if needed.

Save as a PNG.

Your finished :)

I would love to see any results you have made using one of my tutorials. hope you have enjoyed using one of my tuts.