All Ghouls
Author: Precious Beauties
• 10:09 PM
Supplies Needed:
Tube of choice, I used half tube, I am using Anna Liwanag (the tube was from PTE), you can now find her here
Scrap kit: Night of Fright by Angelaz Creationz found here
Template: Ghoul2 by Leah found here

Open the template, duplicate and close the original. Delete the copyright layer. Resize by 700 x 700. Make the background layer visible. I resized all papers by 80%.

Open a paper of choice, select Raster 1 layer, go to Selections - Select All - Float - Defloat. Copy and paste the paper above this layer, go to Selections - Invert and hit delete on the keyboard. Go to Selections - Select None.

Repeat this for all layers.

Apply a drop shadow to all layers.

Open Element 4, resize by 15%. Copy and paste as a new layer, place in the lower left hand side near the bottom. Apply a drop shadow.

Open Element 14, resize by 75%. Copy and paste as a new layer, place on top of the large circle in the center of the template. Apply a drop shadow.

Open Element 19, resize by 12%. Copy and paste as a new layer, place in the lower right hand corner in front of the fence. Apply a drop shadow.

Open element 13, resize by 30%. Copy and paste as a new layer, place in top right hand corner overlapping the chimney on the house. Apply a drop shadow.

Open Element 9, resize by 4%. Copy and paste as a new layer, place on the right hand side of the hat, overlapping the rim a little bit. Apply a drop shadow. Duplicate and mirror, place in front of the pumpkin basket on the right hand side.

Open Element 2, resize by 10%. Copy and paste as a new layer, place in the upper left hand corner of the papers (above the ghost). Apply a drop shadow.

Open Element 21, resize by 20%. Copy and paste as a new layer, place behind the witch hat. Position to your liking. Apply a drop shadow. Duplicate, mirror and flip, move to the top right corner of the template. I place mine behind the large circle in the center.

Open Element 20, resize by 6%. Copy and paste as a new layer, place in front of the witch hat near the left hand side. Apply a drop shadow. Duplicate and place below the words “put your”.

Select your tube, copy and paste as a new layer. If needed resize to fit the template. Place in the center of the template. I moved mine down so that the bottom of the tube is just on top of the house, you can take a peek at my tag for reference if needed. Apply a drop shadow.


Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you have enjoyed yourself and I look forward to having you back here again!! I would love to see what you have created.
| comments ( 0 )
Sexy Devil
Author: Precious Beauties
• 7:26 PM
Supplies Needed:
Tube of choice, close-up and half, I am using Keith Garvey (the tube was from MPT), you can now find him here
Scrap kit: Halloween with the Misfits by Tamie found here
Template: Halloween Temp6 by Scrapity Scrap & More (this site seems to be closed so I uploaded it to my Box account, all copyrights remain the designers) found here
Mask: WSL 318 or one of your choice
Plugin: Xero (optional)

Open the template, duplicate and close the original. Delete the copyright layer. Resize by 700 x 700.

Open a paper of choice, select Raster 2, go to Selections - Select All - Float - Defloat. Copy and paste the paper above this layer, go to Selections - Invert and hit delete on the keyboard. Go to Selections - Select None.

Repeat this for all layers.

Select the square on the left hand side to add your tube, copy and paste your tube above this layer. Place to your liking on the left. Apply a drop shadow. Erase or delete any of the tube that is outside the square. Repeat this for the remaining squares is the center. Don’t forget you can mirror some of these tubes for a different position.

Select the first tube, go to Effects – Plugins – Xero, select one of your favorite effects and apply to your tube. Repeat this for the remaining tubes. I used a different effect for each tube.

Apply a drop shadow to any layers you like.

Open element 47, copy and paste as a new layer. Place above the large circles in the center. Apply a drop shadow.

Open element 31, copy and paste as a new layer. Place below the large circles in the center. Apply a drop shadow.

Open element 37, resize by 30%. Rotate 15 degrees left, copy and paste as a new layer. Place between the two squares on the left hand side near the top. Apply a drop shadow.

Open element 36, resize by 25%. Rotate 15 degrees right, copy and paste as a new layer. Place overlapping the purple star you just added. I placed mine on the lower right part of the purple star. Duplicate and move to the right side of the template. Place on the bottom edge of the strip. Apply a drop shadow.

Open Element 34, resize by 80%, rotate right. Copy and paste as a new layer. Move this layer below the stars. Place at the top of the frame behind the stars. Apply a drop shadow.

Open Element 33, resize by 80%, rotate left. Copy and paste as a new layer. Move this layer below the strip at the bottom. Place at the bottom of the frame behind the strip. Apply a drop shadow.

Open Element 42, resize by 30%. Copy and paste as a new layer. Place on top of the strip on the left hand side. Mine is on the right of the word art “sexy devil”. Apply a drop shadow.

Copy and paste the half tube, place on the right hand side of the template, I placed mine so that the word art at the top was not covered by the tube. Line the bottom of the tube with the top of the strip. Apply a drop shadow.

Copy and paste a paper of choice for your mask, move this layer right above the white background layer. Apply your mask, delete the mask layer and merge group.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you have enjoyed yourself and I look forward to having you back here again!! I would love to see what you have created.
| comments (1)
Sexy Lil Witch
Author: Precious Beauties
• 7:14 PM
Supplies Needed:
Tube: I am using Alex Prihodko found at PFD
Scrap Kit: Gothic Halloween by Kittz Kreations found here
Mask: Splatmask02 by the misfits found here
Plugin: Xero - Porcelain (optional)
Plugin: Penta.com - Dot and Cross (optional)
My Supplies (word Art - here

Open the template, duplicate and close the original. Delete the copyright, Raster 7 and Sexy Lil Devil word art. Resize canvas by 700x700. Add a new layer, move to the bottom. Flood fill with white.

Open a paper of choice, select Gray Rect, go to Selections - Select All - Float - Defloat. Copy and paste the paper above this layer, go to Selections - Invert and hit delete on the keyboard. Go to Selections - Select None.

Repeat this for all layers. Apply a drop shadow to all layers.

I applied Penta.com - Dot and Cross to the long strip, this of course is optional. You can also add it to any layers you like or use a different plugin of choice. I used the default settings.

Select the circle layer. Go to Selections - Select All - Float - Defloat. Copy and paste the full or half tube as a new layer above the selected layer. Position to your liking. Go to Selections - Invert and hit delete on the keyboard. Go to Plugins - Xero - Porcelain, using the default settings apply to the close up tube.

Open element GH-Star Ribbon. Copy and paste as a new layer, Place in the upper left hand corner. Apply a drop shadow.

Open element GH-Circle Blood Spats, copy and paste as a new layer. Place in the upper left corner. Move above the white background. Apply a drop shadow. Duplicate as many as needed until you have them around the entire tag.

Copy and paste the full tube as a new layer. Resize as desired.  Apply a drop shadow.

Open element GH-Candle With Flame, resize by 40 percent. Copy and paste as a new layer. Place on the left hand side in front of the tube. Apply a drop shadow. Duplicate, and mirror. Reposition to your liking. Duplicate on last time and place behind the tubes foot.

Open element GH-Gothic Goblet, resize by 50 percent. Place on the left hand side beside the candle in front of the tube. Apply a drop shadow.

Open element GH-Skull, resize by 80 percent. Copy and paste as a new layer. Place behind the tube and position to where it can be seen between her feet. Apply a drop shadow.

Open the word art, copy and paste as a new layer. Place above the circle on the left hand side. You can also use something of your own if preferred.

Add a new layer above the white background, flood fill with a gradient matching the tag. Apply the mask to this layer. Delete the mask layer and merge group.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you have enjoyed yourself and I look forward to having you back here again!! I would love to see what you have created.
| comments ( 0 )
Happy Halloween
Author: Precious Beauties
• 1:56 PM
Supplies Needed:
Tube of choice, I am using PinUpToons found here
Scrap kit: Halloweeny by Designs by Vaybs found here
Template: Temp 103-Leah by Amy and Leah's Gimptastic Tuts found here
Mask: DBV Mask 36 by Designs by Vaybs found here

Open the template, duplicate and close the original.  Resize template by 600x600. Delete the copyright. Flood fill background layer with white.

Open a paper of choice, select Rect 3, go to Selections - Select All - Float - Defloat. Copy and paste the paper above this layer, go to Selections - Invert and hit delete on the keyboard. Go to Selections - Select None.

Repeat this for all remaining layers.

Apply a drop shadow to all layers.

Open element 19 resize by 60%. Copy and paste as a new layer, place to your liking. Apply a drop shadow. Duplicate and mirror, place to your liking. Resize more and place.

Copy and paste tube as a new layer, resize if needed. Apply a drop shadow.

Open element 9, resize by 40%. Copy and paste as a new layer, place to your liking. Duplicate a many time as desired. Apply a drop shadow.

Open element cat, resize by 60%. Copy and paste as a new layer, place in front of the tube on the right hand side. Apply a drop shadow.

Copy and paste the mask layer above the white background layer. Delete the mask layer and merge group.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you have enjoyed yourself and I look forward to having you come back again!


| comments ( 0 )
Pumpkin Patch
Author: Precious Beauties
• 11:17 AM

Supplies Needed:
Tube of choice, I am using Elias Chatzoudis, you can find him here
Scrap kit Pumpkin Fields by Darkmoon’s Dream found at SATC
My Supplies (frame and mask) here

Open a new image 700 x 700 with a white background.

Copy and paste the frame as a new layer, click inside the frame using the Magic Wand. Go to Selections – Modify – Expand by 10.

Copy and paste a paper of choice below the frame layer. Position to your liking. Go to Selections – Invert and hit delete on the keyboard.

Open Branch 02, copy and paste as a new layer. Place below the frame, position on the right hand side. Erase any of the branch that’s outside the frame. Apply a drop shadow. Duplicate and place on the left hand side.

Open Bats, resize by 60 percent, copy and paste as a new layer. Place on the left hand side below the frame. Apply a drop shadow. Duplicate, position on the right hand side, erase any of the string that’s out past the frame on the bat layers.

Copy and paste the tube as a new layer, resize if needed. Place in front of the frame, position to your liking. Apply a drop shadow. You may have to rearrange the branches around the tube. Erase any of the branches again if needed.

Open Pumpkin 02, resize by 30 and 40 percent. Copy and paste the larger pumpkin as a new layer behind the frame. Place in the bottom left hand corner. Apply a drop shadow. Duplicate, mirror and place in the bottom right hand corner. Copy and paste the smaller pumpkin as a new layer. Place in front of the tube on the left hand side. Apply a drop shadow. Duplicate and place on the right hand side behind the tube.

Open Grass Hill, resize by 60 percent, copy and paste as a new layer. place below the tube and pumpkins, apply a drop shadow. Duplicate a few more and spread out along the bottom of the frame.

Open Mushroom and resize by 15 percent. Copy and paste as a new layer, place at the bottom among the grass and pumpkins. Apply a drop shadow. Duplicate a few more and place around the grass.

Open Berries, resize by 40 percent. copy and paste as a new layer, place at the bottom of the tag among the grass, apply a drop shadow. Duplicate as many as you like and place around the tag.

Open Ribbon 01, resize by 60 percent, copy and paste as a new layer. Position at the bottom of the tag behind the other layers. Apply a drop shadow. Duplicate and place at the top of the frame behind the other layers. Duplicate once more and place on the opposite side.

Open Leaves 01, resize by 40 percent. Copy and paste as a new layer. Place at the bottom of the tag to your liking, apply a drop shadow. Duplicate as many as you like placing the around the bottom. Duplicate again and place around the top and sides of the frame.

Open Leaf, resize by 25 percent, copy and paste as a new layer. Place at the bottom of the tag among the other leaves. Apply a drop shadow. Duplicate as many as you like and place around the tag, including the top and bottom.
Copy and paste the mask included in my supplies as a new layer above the white background. Position to your liking.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background layer first).

Thank you for trying one of my tuts, I hope you have enjoyed yourself and I look forward to having you visit again!
| comments ( 0 )
Are You Spooked?
Author: Precious Beauties
• 4:50 PM

Supplies Needed:
Tube of choice, I am using Jose Cano found at SATC
Scrap kit Spooked by Tasha’s Playground also at SATC
Halloween Template 4 by SSAM
My Supplies (mask and word art) here

Open the template, duplicate and close the original. Delete the copyright, and resize all layers by 90 percent. Resize the canvas by 700 x 700. Flood fill the background with white.

Select back rectangle, go to Selections – Select All – Float – Defloat.

Copy and paste a paper of choice above the selected layer. Position the paper to your liking. Go to Selections – Invert and hit delete on the keyboard. Delete the template layer and add a drop shadow.

Repeat the above steps for the remaining template layers.

Open Web 2, copy and paste as a new layer. Place on the left hand side on top of the other layer. Position to your liking. Duplicate and place on the right hand side inside the strip. See my tag if needed. Erase the web that’s out past the frame of the strip.

Open Spider, resize by 80 percent, copy and paste as a new layer. Place on the left hand side near the edge of the large rectangle. Apply a drop shadow. Duplicate, mirror and place on the right hand side to your liking.

Open Bat, resize by 30 percent, copy and paste as a new layer. Place in the top left corner. Apply a drop shadow. Duplicate and mirror, and position on the right hand side to your liking.

Open Skull 1, resize by 60 percent, copy and paste as a new layer Place on the left hand side of the template at the bottom on the right hand side of the spider. Apply a drop shadow. Duplicate, mirror and place on the right hand side in the same manner.

Copy and paste the tube as a new layer, resize if needed, place to your liking. Apply a drop shadow.

Now find the strip and the word art that’s in the center of the tag. Move these two layers above the tube layer. Now they should be on top of the tube.

Copy and paste the word art included in my supplies, I placed mine at the bottom of the template between the two skulls.

Copy and paste the mask as a new layer also included in my supplies. This should be placed right above the white background.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you have enjoyed using it and I look forward to having you come back again!
| comments ( 0 )
Life's a Witch
Author: Precious Beauties
• 4:47 PM

Supplies Needed:
Tube of choice, I am using Gargirl Art found at ART
Scrap kit Spooktacular by WitchysHeart also found at ART
Template 107 by Beth
Mask of choice

Open the template, duplicate and close the original. Delete the copyright. Change the Opacity to 100 on Raster 1 and then close it off so its hidden. Add a new layer, flood fill with white and move to the bottom.

Select the large oval; go to Selections – Select All – Float – Defloat.

Copy and paste a paper of choice above the selected layer. Position to your liking and then go to Selections – Invert and hit delete on the keyboard. Delete the template layer and apply a drop shadow.

Open Moon, resize by 25 percent. Copy and paste as a new layer in the top left hand corner. Apply a drop shadow.

Open Bat, resize by 15 percent. Copy and paste as a new layer. Place on the right side of the moon. Apply a drop shadow. Duplicate and place below the bat we just added. Duplicate once more and place beside the first two.

Open Pumpkin #5, resize by 20 percent, copy and paste as a new layer. Place in the lower right hand corner below the strips. Apply a drop shadow. Duplicate and mirror. Place on the left hand side.

Open Pumpkin #1, resize by 10 percent, copy and paste as a new layer. Place in between the two pumpkin bunches. Apply a drop shadow.

Open Black Cat, resize by 20 percent, copy and paste as a new layer. Place behind the pumpkins. Apply a drop shadow.

Open Leaves, resize by 60 percent, copy and paste as a new layer. Place at the bottom of the template behind the pumpkins and cat. Position to your liking and apply a drop shadow.

Open Spider, resize by 6 percent, and rotate left 10 degrees. Copy and paste as a new layer. Place above the words Life’s A. Apply a drop shadow.

Copy and paste the tube as a new layer. place to the left, I mirrored mine. Resize if needed. Apply a drop shadow. I also placed mine behind the strip at the bottom, this is up to you.

Open the layer we closed, apply the mask to this layer, delete the mask layer and merge group.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you have enjoyed yourself and I look forward to having you come back again!
| comments ( 0 )
Trick Or Treat
Author: Precious Beauties
• 4:04 PM

Supplies Needed:
Tube of choice, I am using SkyScraps found at SATC
Scrap kit Halloween Candy by Inzpired Creationz also found at SATC
Template 87 by Rose
Mask of choice

Open the template, duplicate and close the original. Delete the copyright and resize the canvas by 700 x 700. Flood fill the bottom layer with white.

Select layer Blue Rectangle, go to Selections – Select All – Float – Defloat.

Copy and paste a paper of choice above the selected layer. Position to your liking. Go to Selections – Invert and hit delete on the keyboard. Delete the template layer and apply a drop shadow.

Repeat the above steps for the remaining template layers.

I changed the background color on the word art to match the tube. I then merged the two together. Close this layer off for now.

Copy and paste the tube as a new layer, resize if needed. Place on the right hand side and apply a drop shadow.

Open Spider, resize by 60 percent. Copy and paste as a new layer. Place on top of the rectangle on the left hand side. Apply a drop shadow.

Open Ghost Trio, resize by 60 percent. Copy and paste as a new layer. Place in the bottom left hand corner of the template. Apply a drop shadow.

Open Bow 1, resize by 40 percent. Copy and paste as a new layer, place in the upper left hand corner of the square with the spider. Apply a drop shadow.

Open Candy Pumpkin, resize by 30 percent, mirror. Copy and paste in the bottom right hand corner next to the tube. Apply a drop shadow.

Open Pumpkin 1, resize by 30 percent. copy and paste as a new layer. Place on the left hand side of the tube. Apply a drop shadow.

Open Candy Corn Spill, resize by 60 percent. Copy and paste as a new layer. Place at the bottom of the template to your liking. Move below the other layers. Apply a drop shadow. Duplicate as many as you like and place across the bottom of the template.

Open Bat, resize by 40 percent. Copy and paste as a new layer, place at the top on the left hand side. Apply a drop shadow. Duplicate, mirror, place on the right hand side next to the tube.

Open the word art we closed earlier, using the Selection tool move the words around to your liking, placing them on the left hand side. Apply a drop shadow.

Select some Candy that you like, I resized mine by 10 percent, copy and paste as a new layer. Place at the bottom of the template to your liking. Apply a drop shadow to all layers.

Open Cupcake 1, resize by 20 percent. Copy and paste as a new layer. Place on the left hand side below the word art. Apply a drop shadow.

Open Candy Cane, resize by 40 percent. Copy and paste as a new layer. Place behind the word Trick, move to the left, apply a drop shadow. Duplicate and reposition on the right.

Copy and paste a paper of choice above the white background, apply the mask to this layer. Delete the mask layer and merge group.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you have enjoyed yourself and I look forward to having you come back.
| comments ( 0 )
Sexy Witch
Author: Precious Beauties
• 1:44 PM

Supplies Needed:
Tube of choice, I am using Celinart found at SATC
Scrap kit Sexy Witch by Inzpired Creationz also found at SATC
Template 7 by SSAM
Mask of choice

Open the template, duplicate and close the original. Delete the copyright and resize canvas 700 x 700. Flood fill Raster 1 with white.

Select the large circle layer, go to Selections – Select All – Float – Defloat.

Copy and paste a paper of choice above the selected layer. position to your liking, go to Selections – Invert and hit delete on the keyboard. Delete the template layer and apply a drop shadow.

Repeat the above steps for the remaining template layers.

I changed the word art to match the colors in my tube, this is up to you. I also moved the word art on both ends, I placed them inside the strip, see my tag if needed for placement.

Select the two squares in the middle of the template. Go to Selections – Select All – Float – Defloat.

Copy and paste the tube as a new layer. Place inside the square on the left hand side. Resize if needed. Place to your liking, apply a drop shadow. Repeat this for the square on the right hand side, you may want to mirror one of the tubes.

Open Web 1, resize by 60 percent, mirror. Copy and paste as a new layer. Place at the top of the two squares we just added the tubes to. Duplicate, mirror and flip. Reposition at the bottom of the squares.

Open Ribbon 2, resize by 40 percent. Copy and paste as a new layer. Place at the top in the left hand corner. Apply a drop shadow. Duplicate, move to the right hand side, place to your liking.

Open Ribbon 3, resize by 60 percent. Copy and paste as a new layer. Position behind the strip on the left hand side. Apply a drop shadow. Duplicate, mirror. Place in the same manner on the right hand side. Duplicate, mirror and flip. Place in the same manner as the bottom. Duplicate, mirror. Reposition if needed.

Open Skull 2, resize by 30 percent, rotate left 10 degrees. Copy and paste as a new layer. place in the top right hand corner to your liking. Apply a drop shadow. Duplicate, mirror and place on the left hand side.

Open Star 2, resize by 20 percent, rotate right 10 degrees. Copy and paste as a new layer. place on the lower right hand side to your liking. Apply a drop shadow. Duplicate, mirror and place on the left hand side.

Copy and paste the tube behind the rectangle containing the word art. Resize tube if needed. Apply a drop shadow.

Open Broom, duplicate. Resize one by 80 percent and the other by 40 percent. Copy and paste the larger broom as a new layer. Place on the right hand side next to the tube. Apply a drop shadow. Copy and paste the smaller broom as a new layer. Place on the right hand side next to the word art. Apply a drop shadow. Repeat this for the left hand side as well.

Add a new layer above the white background, make a gradient using two colors of your choice and flood fill this layer. Apply the mask to this layer. Delete the mask layer and merge group.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you had fun and I look forward to you visiting again!!
| comments ( 0 )
Hocus Pocus
Author: Precious Beauties
• 5:56 PM

Supplies Needed:
Tube of choice, I am using Jose Cano, you can find him at SATC
Scrap kit Hocus Pocus by Inzpired Creationz also found at SATC
My supplies (frame, word art and background) here

This is an awesome kit for Halloween; you really should check it out!

Open a new image 700 x 700 with a white background.

Copy and paste the frame included in my supplies as a new layer.

Copy and paste the background included in my supplies as a new layer, place below the frame. You can always use a paper from the kit if you like.

Copy and paste the word art included in my supplies as a new layer. Move this layer below the frame and background.

Everything from here on will be added inside the frame, except for the sign.

Open Tree 1, copy and paste as a new layer. Place on the left hand side position to your liking. Erase the parts of the tree that’s outside the frame. Apply a drop shadow.

Open Moon, resize by 40 percent. Copy and paste as a new layer. Place in the center at the top of the frame. Erase the top of the moon that’s out past the frame. Apply a drop shadow.

Open House 1, resize by 50 percent. Copy and paste as a new layer. Place under the moon and a little to the right. Apply a drop shadow.

Open Tree 2, copy and paste as a new layer. Place on the right hand side, position to your liking. Erase the part of the tree that’s out past the frame. Apply a drop shadow.

Copy and paste the tube as a new layer. Place to your liking. Resize if needed. Apply a drop shadow. If the tube is out past the bottom of the frame, erase it.

Open Pumpkin Patch, resize by 60 percent. Copy and paste as a new layer, place behind the tube and to the left. Apply a drop shadow. Erase any of the pumpkin that’s out past the frame. Duplicate and mirror and place in the same manner on the right hand side.

Open Cat, resize by 50 percent, mirror. Copy and paste as a new layer. Place on the right hand side in front and to the right of the tube. Apply a drop shadow. Erase any of the cat that’s out past the bottom of the frame.

Open Cauldron 3, resize by 50 percent. Copy and paste as a new layer. Place in front of the tube and the cat, apply a drop shadow. Erase any of the cauldron that’s out past the bottom of the frame.

Open Sign, resize by 60 percent. Copy and paste as a new layer. Place on top of the frame, position on top of the cauldron. Apply a drop shadow.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you have enjoyed yourself and I look forward to having you back here again!!
| comments ( 0 )