Supplies Needed:
Tube of choice (full and close-up), I am using Jose Cano found at PTE
Scrap kit Love Sick by Felice Original
Template 7 by Alyssa’s Tutorials
(you can download it here)
Mask of choice

Open the template, duplicate and close the original. Delete the copyright, resize all layers by 90 percent. Resize the canvas by 700 x 700. Flood fill the background layer with white.

Select the thin circle layer, go to Selections - Select All - Float - Defloat.

Open a paper of choice from the scrap kit, resize to your liking. Copy and paste as a new layer above the selected layer, position to your liking. Go to Selections - Invert and hit delete on your keyboard. Delete the template layer and apply a drop shadow.

Repeat the above steps for the remaining template layers.

Open File Frame, resize by 50 percent. Copy and paste as a new layer above the long rectangle layer, position to the right. Apply a drop shadow. Duplicate, mirror and reposition on the left hand side.

Select the slats on the left hand side, go to Selections - Select All - Float - Defloat.

Copy and paste the full body tube as a new layer above the selected layer, position to your liking. Apply a drop shadow. Go to Selections - Invert and hit delete on the keyboard. Lower Opacity to around 73. Repeat this for the slats on the right hand side, only this time mirror your tube in another direction.

Open the close-up tube, place in the center of the circle. Resize if needed, erase any of the tube that’s out paste the circle frame. Apply a drop shadow.

Open the Champagne Flutes, resize by 25 percent. Copy and paste as a new layer in front of the circle frame. Position towards the left. Apply a drop shadow.

Open Swag, resize by 50 percent. Copy and paste as a new layer at the bottom of the tag, position in the center. Apply a drop shadow. This layer should be above the glasses.

Open Cupcake, resize by 12 percent. Copy and paste as a new layer. Place in front of the swag on the left hand side. Apply a drop shadow.

Open Heart Pillow, resize by 12 percent. Go to Image - Free Rotate and rotate all layers 20 degrees right. Copy and paste as a new layer, place at the lower corner on the left hand side. Apply a drop shadow. Duplicate, and rotate left 40 degrees, place in the upper right hand corner.

Open Bow, resize by 25 percent. Copy and paste as a new layer. Place on the right hand side on top of the slats. Apply a drop shadow. Duplicate, mirror and place at the top left corner of the slats.

Open Heart Wire, resize by 50 percent, copy and paste as a new layer. Place in the top right hand side of the tag, position so some of the wire is showing out past the template layers, apply a drop shadow. Move this layer just above the white background. Duplicate, mirror, do this until you have wire showing in the 4 corners.

Open a paper of choice, resize by 700 x 700. Copy and paste as a new layer above the white background layer. Apply the mask to this layer, delete the mask layer and merge group.
Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

Thank you for trying one of my tuts, I hope you have enjoyed it and will come back for more! I would love to see what you created.

Supplies Needed:
Scrap kit Season of Love by Dreamland Designs
(click on the preview to download the kit)
Tube of choice, I am using Jennifer Janesko purchased from CILM which has closed, but you can still find her work at CDO.
Mask of choice

All ready to begin?
Awesome!

Open a new image 700 x 700 with a white background. We will be cropping later.

Open Frame1 and resize by 110 percent. Paste as a new layer.

Using two colors from your tube make a gradient. Select your Selection tool on the left and draw out a square over top of the frame. Try not to select any of the holes. Add a new layer below the frame and flood fill with the gradient.

Copy and paste your tube as a new layer. Resize if needed, I left some of the tube stick out of the frame. This is up to you. Erase anything out past the frame that you dont want showing. Apply a drop shadow.

Open Black Bow Heart and resize by 50 percent. Paste as a new layer and position on top of the frame at the bottom left corner. Apply a drop shadow.

Open Tag Bow and resize by 40 percent. Paste as a new layer and position on top of the frame on the right lower corner. See my tag for reference. Apply a drop shadow.

Open Feathers and resize by 50 percent. Paste as a new layer. Position on top of the frame in the upper left corner. Move this layer below the frame layer. Apply a drop shadow.

Open White Curly Ribbon, paste as a new layer. Mirror and flip, place this at the top of the frame. Erase parts of the ribbon you dont like being on the tube.

Open Black Ribbon and resize by 50 percent. Position on top of the frame on the left hand side. Apply a drop shadow. Duplicate and mirror. Place so that you can see it sticking out past the frame. Play around with these two layers a little bit, erase anything you would like. I then copy and pasted the ribbon again and placed this one at the bottom of the frame.

Open Baby Breaths and resize by 50 percent. Position on top of the frame on the left side. Erase anything on your tube if desired. Apply a drop shadow. Make sure this layer is below the black heart. Duplicate amd mirror, place on top of the frame, this layer should be below the tag bow.

Open Angel Wing Bow, paste as a new layer. Position this on the right side of your tag. Place where you think it looks good. I placed mine kind of in the back allowing some of the ribbon to cover the tube.

Open Butterfly and resize by 15 percent. Paste as a new layer and position on top of the black heart. Apply a drop shadow. Duplicate and mirror, place this one in the upper right hand corner of the frame.

Open Hearts and paste as a new layer. Position around the frame wherever you like. Apply a drop shadow. Duplicate as many as needed.

Open Rose Petals and resize by 30 percent. Position at the bottom of the tag. Apply a drop shadow. Duplicate as many as needed. See my tag for reference if needed.

Select a few petals with your Freehand tool, copy and paste as a new image, Go to Image - and select Grey Scale. Copy and paste around the red petals. Apply a drop shadow. Duplicate as many times as needed.

Open Word Art 3, I added a gradient Glow around it, but you can always add a good white drop shadow. Paste as a new layer at the top of your tag. Apply a drop shadow. Duplicate and place at the bottom of the tag.

Add any copyrights. Add your name.

Crop, resize if desired. Save as a PNG.

All finished, hope you have enjoyed using one of my tuts. I would love to see what you have created.

Supplies Needed:
Tube of choice (full and close-up), I am using one by Uchakina Irina purchased from MPT
(MPT is closed and I don’t know where she can be found now)
Template 416 by Divine Intentionz
Scrap kit With Love by KC Exquisite Dezigns
Mask of choice

Open template, duplicate and close the original. Delete the copyright and stars. Resize all layers by 90 percent. Resize canvas by 700 x 700. Flood fill the background layer with white.

Select square 3, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. Position to your liking, go to Selections - Invert and hit delete on your keyboard. Delete the template layer and apply a drop shadow.

Repeat the steps above for the remaining template layers.

Select the small circle on the left, go to Selections - Select All  - Float - Defloat. Copy and paste the tube as a new layer above the selected layer. Position to your liking, apply a drop shadow. Go to Selections - Invert and hit delete on your keyboard. Change the Blend Mode to Soft Light.

Repeat above steps for the circle on the right, I mirrored my tube of this side.

Select the square layer in the center, go to Selections - Select All - Float - Defloat. Copy and paste the tube as a new layer in the middle of the square, position to your liking, drop shadow. Go to Selections - Invert and hit delete on your keyboard. Change the Blend Mode to Soft Light.

Copy and paste a paper as a new layer above the white background layer, apply the mask to this layer. Delete the mask layer, merge group. Resize mask to your liking.

Open Element 24, copy and paste as a new layer above the mask. Position to the left hand side, apply a drop shadow. Duplicate, mirror and reposition if needed.

Open Bonus Cluster, resize by 85 percent. Copy and paste as a new layer above the larger circle behind the square. Position around the circle. Apply a drop shadow.

Open Element 32, resize by 50 percent. Copy and paste as a new layer, position at the top left hand side of the cluster frame. Apply a drop shadow. Duplicate and move down below the square frame just so the ribbon is showing. See my tag for reference if needed.

Copy and paste the full tube as a new layer, position in the center. Resize if needed and apply a drop shadow.

Open Element 25 and resize by 60 percent. Copy and paste as a new layer. Place at the top left hand side of the cluster frame. Apply a drop shadow. Duplicate and place on the right hand side of the tube. I placed mine right above the small circle.

Open Element 26 and resize by 20 percent. Copy and paste as a new layer. Place in the lower right hand corner of the circle on the left hand side. Apply a drop shadow. Duplicate, mirror and place below the circle.

Open Element 9, resize by 15 percent. Copy and paste as a new layer, position under the circle on the right hand side. Apply a drop shadow. Duplicate and position at the top right of the circle. Duplicate once more and move to the far left near the bottom of the left hand circle, if you need you can look at my tag for placement.
Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

Thank you for trying one of my tuts, I hope you have enjoyed yourself and wish to see you back here again. I would love to see what you have created!

Supplies Needed:
Tube of choice, I am using one of Elias Chatzoudis found PTE
Scrap kit Love Is So Sweet by Randy’s Sin
Template yourmyheart by Biene found at Creative Misfits
Mask of choice

Open the template, duplicate and close the original. Delete the copyright.

Select the circle, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. Resize if needed. Position, once happy go to Selections - Invert and hit delete on your keyboard. Apply a drop shadow and delete the template layer.

Repeat the above steps for the remaining template layers EXCEPT for the small hearts.

Open Wrapped Heart 1, resize by 12 percent. Copy and paste as a new layer. Place on top of the small heart on the right. Apply a drop shadow and delete the template heart. Do this for the other template heart as well.

Open Ribbon 1, resize by 70 percent. Copy and paste as a new layer. Place the bottom of the ribbon on the bottom left hand side of the template. Apply a drop shadow.

Open Ribbon 2, resize by 60 percent, copy and paste as a new layer. Place the top of the ribbon on the top right hand corner. Apply a drop shadow.

Open Bow 3, resize by 25 percent. Copy and paste as a new layer. Place at the top right  hand corner on top of the darker ribbon. Apply a drop shadow.

Open Hearts 1, resize by 40 percent. Copy and paste as a new layer, place on the left hand side . Apply a drop shadow. Duplicate, mirror, reposition if needed.

Copy and paste the tube as a new layer. Resize if needed. Place on the right hand side of the large template heart. Apply a drop shadow.

Open Cupcake 4, resize by 15 percent. Copy and paste as a new layer. Place on the lower left hand corner of the heart. Apply a drop shadow.

Open Cupcake 2, resize by 12 percent, copy and paste as a new layer. Place on the right hand side of the cupcake we just added, apply a drop shadow.

Open Cupcake 3, resize by 15 percent, copy and paste as a new layer. Place on the bottom right hand side of the circle. Apply a drop shadow.

Open Rose 5, resize by 30 percent. Copy and paste as a new layer. Place behind the cupcake we just added on the right hand side. Apply a drop shadow.

Open Scatterz 5, resize by 60 percent, copy and paste as a new layer. Place behind the cupcakes. Erase any of the scratterz that’s on the tube you don’t want there. Apply a drop shadow.

Type the words “LOVE IS SO SWEET” in front of the tube and cupcakes at the bottom of the tag. Apply a drop shadow or gradient glow. Position to your liking.

Open Scatterz 1,  using the Freehand tool, select some of the hearts. Copy and paste as a new layer, placing them in front of the word art. Apply a drop shadow. Duplicate if needed.
Open some of the Kisses, resize by 8 percent. Place around the bottom of the word art and cupcakes. Apply a drop shadow to each Kiss.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

Thank you for trying one of my tuts, I hope you will come back for more. I would love to see what you have created!

Supplies Needed:
Tube of choice, I am using one by Elias Chatzoudis found at PTE
Scrap kit My Sweet Valentine by Tutorials by Daph
Template 418 by Divine Intentionz
Mask of choice

Open the template, duplicate and close the original. Delete the copyright, resize all layers by 90 percent. Resize canvas by 700 x 700. Flood fill the background layer with white.

Select the layer Square Left, go to Selections - Select All - Float - Defloat.

Open a paper of choice, resize if desired. Copy and paste it as a new layer above the selected layer. Position to your liking, go to Selections - Invert and hit delete on your keyboard. Delete the template layer and apply a drop shadow.

Repeat the above steps for the remaining template layer.

Open Ribbon, go to Image - Rotate Right. Copy and paste as a new layer. Place below the diamond layer, should be on top of the two circles. Position to your liking and apply a drop shadow.

Open Ribbon 2, go to Image - Rotate Left. Copy and paste as a new layer. Place with the ribbon we just added, position to your liking. Apply a drop shadow.

Open Bow 1, resize by 50 percent. Copy and paste as a new layer, place on the right hand side at the top of the circle. Apply a drop shadow.

Open Bow 2, resize by 50 percent. Copy and paste as a new layer. Place on the left hand side at the top of the circle. Apply a drop shadow.

Open Berry Bush, resize by 60 percent. Copy and paste as a new layer. Place on the left hand side on top of the diamond layer. Apply a drop shadow. Duplicate, mirror.

Open Heart 1, resize by 40 percent. Copy and paste as a new layer. Place on the right hand side below the bow. Apply a drop shadow.

Open Heart 2, resize by 40 percent, copy and paste as a new layer. Place on the left hand side below the bow. Apply a drop shadow.

Copy and paste the tube as a new layer, resize if needed. Place in the middle of the template. Apply a drop shadow.

Open Love Basket, resize by 60 percent, copy and paste as a new layer. Place at the bottom right hand side. Apply a drop shadow.

Open Champagne, resize by 40 percent. Copy and paste as a new layer. Place on the left hand side at the bottom. Apply a drop shadow.

Open Candle 1, resize by 25 percent. Copy and paste as a new layer. Place on the right hand side of the champagne bottle. Apply a drop shadow. Duplicate, and place on the left side of the bottle.

Open Heart Scatter 1, resize by 40 percent. Copy and paste as a new layer. Place at the bottom left hand side. Apply a drop shadow. Duplicate, mirror.

Open a paper of choice, copy and paste as a new layer above the white background. Apply the mask to this layer. Delete the mask layer and merge group.

I typed out the words “Kiss To U” at the bottom of the tag in the center. Apply a drop shadow.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

Thank you for trying one of my tuts, I hope to see you back here again! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using the talented Zindy Nielsen found here
Scrap kit Paint the Town Pink by Wicked Princess
Template 154 by Blissfully Beth
Mask of choice

This tag is soooo easy to make you will have time for a nap afterwards…lol

Open the template, duplicate and close the original. Delete the copyright, resize all layers by 95 percent. Resize the canvas by 700 x 700.

Select the white oval, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. Resize and position as desired. Go to Selections - Invert and hit delete on your keyboard. Delete the template layer.

Repeat above steps for the remaining template layers. Apply a drop shadow to any layer you wish.

Open Heart Bow, resize by 30 percent. Copy and paste as a new layer, place at the bottom on top of the oval frame towards the left hand side. Apply a drop shadow.

Open Lips and resize by 40 percent. Copy and paste as a new layer. Place above the bow at the bottom of the tag, apply a drop shadow. Duplicate, mirror and place near the top on the right hand side.

Open Glitter Splatter, copy and paste as a new layer above the white background. Position to your liking, apply a small drop shadow.

Open Rose Corsage, resize by 30 percent, copy and paste as a new layer. Place at the bottom of the heart on the left hand side. Apply a drop shadow. Duplicate, mirror and place on the right hand side overlapping the heart.

Copy and paste a paper of choice above the white background layer, apply the mask to this layer. Delete the mask layer and merge group. Resize if needed.

Add any copyrights and your name.

Crop, resize again if desired. Save as a PNG.

Thank you for trying one of my tuts, I hope you have enjoyed using it. I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using Ismael Rac found here
Scrap kit Cupid by Laurie Made Me Scraps
My Supplies (frame template, mask, word art) here

Open a new image 700 x 700 with a white background.

Copy and paste the frame template included in my supplies as a new layer. Go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the frame, resize if desired. Go to Selections - Invert and hit delete on your keyboard. Delete the template layer.

Select the Magic Wand and click inside the frame, go to Selections - Modify - Expand by 5.

Copy and paste a paper below the frame layer, position to your liking, go to Selections - Invert and hit delete on your keyboard.

Apply a drop shadow to the frame layer.

Copy and paste the mask included in my supplies, place above the white background. Position to your liking.

Open 18, resize by 60 percent. Copy and paste as a new layer inside the frame. Position on the right side, erase any of the flowers out side of the frame. Apply a drop shadow. Copy and paste again this time on the lower left hand side. Erase any of the flowers out past the bottom of the frame. Apply a drop shadow.

Copy and paste the tube as a new layer, erase any of the tube out past the frame you don’t want showing. Apply a drop shadow.

Open 41, copy and paste as a new layer above the mask layer. Place on the left hand side of the tag so it showing out past the frame, apply a drop shadow. Duplicate and mirror place on the right hand side. Duplicate a couple more times and place to your liking.

Open 68, resize by 85 percent. Copy and paste as a new layer. Place on the lower left hand side on top of the frame. Apply a drop shadow.

Open 31, resize by 70 percent. Copy and paste as a new layer. Place on the left hand side on top of the knot in the ribbon. Apply a drop shadow.

Open 70, resize by 70 percent, go to Image - Free Rotate and rotate right 10 degrees, copy and paste as a new layer. Place on the right hand side about half way down the frame. Apply a drop shadow. Duplicate, mirror and place on the left hand side right above the tag.

Open 71, resize by 70 percent, go to Image - Free Rotate and rotate right 10 degrees, copy and paste as a new layer. Place on the right hand side above the purple heart. Apply a drop shadow. Duplicate, mirror and place on the left hand side right above the purple heart.

Open 36, resize by 60 percent. Copy and paste as a new layer. Place at the bottom on top of the frame. Apply a drop shadow.

Open 74, copy and paste as a new layer, place in the center of the bow we just added. Apply a drop shadow.

Open 58, copy and paste as a new layer, place beside the tag on the left hand side. Apply a drop shadow.

Open 54, resize by 80 percent. Copy and paste as a new layer. Place on the right hand side overlapping the pink flower we just added. Apply a drop shadow. Duplicate, place above the blue heart on the left hand side, move this layer below the blue heart.

Open 51, resize by 60 percent, copy and paste as a new layer. Place at the bottom overlapping the two flowers on the lower left hand side, apply a drop shadow. Duplicate, and place on the lower right hand side beside the bow.

Copy and paste the word art included in my supplies as a new layer, place at the top right hand side just outside the frame.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

Thank you for trying one of my tuts. I hope you have enjoyed using and I see you again! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using one of Ismael Rac found here
Scrap kit Sweet Love by Purple’s Tutorials
Template 174 by Designs by Ali found here
Mask of choice

Open the template, duplicate and close the original. Delete the copyright. Resize all layers by 80 percent, resize canvas 700 x 700. Flood fill the bottom layer with white.

Select Raster 2, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of your choice above the selected layer. Position to your liking, resize if needed. Once happy go to Selections - Invert and hit delete on your keyboard. Apply a drop shadow. Delete the template layer.

Repeat above steps for the remaining template layers.

Open Cookie 1, resize by 50 percent. Copy and paste as a new layer. Place at the top left hand side on top of the slats. Apply a drop shadow. Duplicate and place at the top right of the circle on the right hand side.

Open Cookie 2, resize by 40 percent. Copy and paste as a new layer. Place overlapping the star on the top left. Apply a drop shadow. Duplicate and place overlapping the star we just added on the right.

Open String 3, resize by 50 percent. Copy and paste as a new layer. Place in the center of the dark pink star on the top left hand side, apply a drop shadow.

Open Balloon 3 and resize by 80 percent. Copy and paste as a new layer. Place on the right hand side near the top of the template. Apply a drop shadow. See my tag for reference if needed.

Open Word Art 1, resize by 60 percent, go to Image - Free Rotate and rotate 30 degrees right. Copy and paste as a new layer. Place on the left hand side right below the stars. Apply a drop shadow.

Open Beaded String 2, resize by 80 percent. Copy and paste as a new layer. Place below the word art. Apply a drop shadow.

Open Butterfly 1, resize by 20 percent, go to Image - Free Rotate and rotate 20 degrees right. Copy and paste as a new layer. Place overlapping the bottom left of the balloon. Apply a drop shadow. Duplicate, mirror and place overlapping the “W”.

Open Splat 2, copy and paste as a new layer, place above the white background. Position so you can see some of the splatter out past the template. Apply a drop shadow. Duplicate, mirror and flip, reposition if needed.

Open Splat 4, copy and paste as a new layer, place above the white background layer, just like the last spatter position so its seen out past the template. Apply a drop shadow. Duplicate, mirror and flip. Reposition if needed.

Open Cupcake 1, resize by 30 percent. Copy and paste as a new layer. Place at the bottom left hand side below the string. Apply a drop shadow.

Copy and paste the tube to your liking, resize if needed. Apply a drop shadow.

Open Rose 1 and 3, resize both by 20 percent, copy and paste as a new layer. Place around the tube. Apply drop shadows to both roses.

Open Swirl and resize by 20 percent. Copy and paste as a new layer. Place to your liking, apply a drop shadow. Duplicate as many as you like placing them to your liking.

Open a paper of choice, resize by 700 x 700. Copy and paste as a new layer above the white background. Apply the mask to this layer. Delete the mask layer and merge group. Resize if needed.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

Thank you for trying one of my tuts, I hope you have enjoyed using it. I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using one of Martin Abel found at CDO
Scrap kit Steampunk Valentine by Scrap Dimensions
Template 4 by Alyssa’s Tutorials
(her site is closed so the template is included in my supplies)
My supplies (screws, word art) here

Open the template, duplicate and close the original. Delete the copyright and resize canvas 700 x 700.

Select the large circle, go to Selections - Select All - Float - Defloat.

Copy and paste as a paper of choice, resize if desired, place above the selected layer and position to your liking. Go to Selections - Invert and hit delete on your keyboard. Delete the template layer.

Repeat the steps above for all remaining template layers.

Apply a drop shadow to the frame layers.

Open Wrap 1, resize by 80 percent. Copy and paste as a new layer. Place at the bottom of the oval. Erase any of the ribbon that’s out past the sides of the rectangle. Apply a drop shadow.

Copy and paste the rectangle word art that’s included in my supplies, place inside the top rectangle frame. Duplicate and place inside the frame at the bottom rectangle.

Copy and paste the circle word art in the middle of the oval below the frame.

Duplicate the large heart at the top right hand corner. Mirror and place at the bottom left hand side at the top of the bottom rectangle.

Open Flower 3 and resize by 15 percent. Copy and paste as a new layer. Place at the top left of the top rectangle. Apply a drop shadow. Duplicate and place on the ribbon on the left hand side.

Open Flower 2 and resize by 15 percent. Copy and paste as a new layer. Place on the right hand side overlapping the oval frame. Apply a drop shadow.

Open Flower 1 and resize by 15 percent, copy and paste as a new layer. Place above the gold flower on the top left hand side. Position so the red flower is overlapping the gold flower. Apply a drop shadow.

Open Hearts 2 and resize by 20 percent, copy and paste as a new layer. Place on the right hand side on top of the ribbon, see my tag for reference if needed. Apply a drop shadow.

Open Heart 1, resize by 10 percent, go to Image - Free Rotate and rotate 8 degrees left. Copy and paste as a new layer. Place in the lower left hand corner. Apply a drop shadow. Duplicate, mirror, and place overlapping the red heart on the top right hand side.

Open Gut 2 and resize by 15 percent, go to Image - Free Rotate and rotate 8 degrees left. Copy and paste as a new layer, place at the bottom left hand side overlapping the large heart. Apply a drop shadow.

Open Gut 1 and resize by 15 percent, copy and paste as a new layer. Place at the top left hand side below the two flowers. Apply a drop shadow. Duplicate and place on the right hand side overlapping the heart.


Open Lock and Key, resize by 12 percent, copy and paste as a new layer. Place at the bottom in the center of the bow on the ribbon. Erase part of the lock to make it look attached. Apply a drop shadow.

Copy and paste one of the screws included in my supplies, position at the top corner on the bottom rectangle. Apply a drop shadow. Duplicate, and place on the right hand side, duplicate once more and place in the center of the top rectangle.

Copy and paste the tube as a new layer, position in the center. Resize if needed. Erase any of the tube that’s out past the bottom of the lower rectangle. Apply a drop shadow.

Copy and paste a paper of choice above the white background. Apply the mask to this layer, delete the mask layer and merge group. Resize if needed.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

Thank you for trying one of my tuts, I hope you have enjoyed using it, I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using one by Elias Chatzoudis found at PTE
Scrap kit Kinky Kupid by Randy’s Sin
Template 106 by Denz Designz
Mask of choice

Open the template, duplicate and close the original. Delete the copyright and word art. Resize canvas 700 x 700. Flood fill the bottom layer with white.

Select the left heart, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. Resize paper if needed. Once happy go to Selections - Invert and hit delete on your keyboard. Delete the template layer. Apply either a drop shadow or gradient glow.

Repeat above steps for remaining template layers.

Open Heart 1 and resize by 25 percent, go to Image Free Rotate and rotate 15 degrees left. Copy and paste as a new layer. Place on the left hand side over lapping the template heart. Apply a drop shadow. Duplicate and mirror, place reposition if needed so its overlapping the template heart on the right hand side.

Open Hearts 1 and resize by 50 percent,  copy and paste as a new layer. Place at the bottom of the template. Apply a drop shadow.

Open Scratterz 4, resize by 50 percent, copy and paste as a new layer. Place above the white background layer. Position to your liking. Apply a drop shadow.

Open Quiver 1 and resize by 40 percent, copy and paste as a new layer. Place on the right hand side near the bottom of the tag, apply a drop shadow.

Open Fuzzy Cuffs 2, resize by 15 percent, copy and paste as a new layer. Place in front of the bag with the arrows. Apply a drop shadow.

Open Scatterz 2, resize by 50 percent, copy and paste as a new layer. Place to your liking, apply a drop shadow. Duplicate as many as you desire.

Copy and paste the tube as a new layer, resize if needed. Place in the middle of the tag. Apply a drop shadow.

Open Martini 2 and resize by 15 percent, copy and paste as a new layer. Place in front of the tube. Apply a drop shadow.

Open Arrow 1 and resize by 20 percent, go to Image - Free Rotate and rotate left 45 degrees. Copy and paste as a new layer, place the arrow in front of the tube. Apply a drop shadow.

Copy and paste a paper of choice above the white background layer. Apply the mask to this layer. Delete the mask layer and merge group. Resize if needed.

Select the strip that runs across the tag, type “Kindy Kupid” across the strip. Apply a drop shadow.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG

Thank you for trying one of my tuts, I hope you have enjoyed using it, I would love to see what you have created!

Supplies Needed:
Tube of choice, I am using a tube of two Yorkies, please note that I had this tube for a while and there is no artist listed, if you know who it is please leave me know and I will happily give credit.
My supplies (everything for the tag) here

I just love these little dogs! This tag is very quick and easy so ready to get started? GREAT!

Open a new image 700 x 700 with a white background, we will be cropping later.

Open the frame included in my supplies, BHS_luckyinlove, and paste as a new layer. Apply a drop shadow.

Copy and paste the background as a new layer below the frame.

Copy and paste the mask included in my supplies, make sure this layer is above the white background layer.

Copy and paste the hanging heart with the bow included in my supplies, place on the right hand side at the top.

Copy and paste the double heart at the top of the frame a little to the right, this should overlap the hanging heart.

Open the small heart included in my supplies, place to your liking and duplicate as many as you desire placing them throughout the tag.

Copy and paste the tube as a new layer inside the frame( resize if needed), erase any of the tube that’s out past the frame. Apply a drop shadow.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

Bet, this is the fasts tag you ever made..lol. Thank you for trying one of my tuts, I hope you have enjoyed using it, I would love to see what you have created!

Supplies Needed:
Tube of choice (full body and close-up), I am using one of Jose Cano found at PTE
Scrap kit I Heart You by Designs by Ali found here
(this is linked right to her 4Shared because I cant find her site now)
Template 190 by Designs by Ali here
Mask of choice

Open the template, duplicate and close the original. Delete the copyright layer and resize all layers by 90 percent. Resize canvas by 700 x 700, flood fill the bottom layer with white.

Select Raster 2, go to Selections - Select All - Float - Defloat.

Open a paper of choice, resize if desired and copy and paste as a new layer above the selected layer. Once positioned go to Selections - Invert and hit delete on your keyboard. Apply a gradient glow or drop shadow. Delete the template layer.

Repeat the above steps for the remaining template layers.

Select the large rectangle in the center, go to Selections - Select All - Float - Defloat. Copy and paste your close-up inside the rectangle frame. Position and resize to your liking. Go to Selections - Invert and hit delete on your keyboard. Apply a drop shadow. Lower Opacity to around 70

Copy and paste a paper of choice above the white background layer. Apply the mask to this layer. Delete the mask layer and merge group. Resize if needed.

Open Falling Hearts 1 and resize by 50 percent. Copy and paste as a new layer. Place on the left hand side. Apply a drop shadow. Select the Selection tool and select the large heart at the bottom. Copy and paste as a new layer. Place this heart in the upper right hand corner of the rectangle frame with the close-up.

Open Hanging Hearts, resize by 30 percent. Copy and paste as a new layer. Place at the bottom of the frame with the close-up. Position on the right hand side, apply a drop shadow.

Open Winged Hearts 1, resize by 40 percent, go to Image - Free Rotate and rotate left 10 degrees. Copy and paste as a new layer, place at the top left hand side on top of the heart. Apply a drop shadow.

Open Bead Mess 1 and resize by 50 percent. Copy and paste as a new layer. Place on the left hand side above the mask layer. Apply a drop shadow.

Open Bead Mess 2 and resize by 50 percent. Copy and paste as a new layer. Place on the right hand side above the mask layer. Apply a drop shadow.

Open Ribbon 3 and resize by 30 percent, copy and paste as a new layer. Place at the bottom of the tag, apply a drop shadow.

Open Ribbon 4 and resize by 30 percent. Copy and paste as a new layer. Place at the top of the rectangle with the close-up. Apply a drop shadow.

Open Ribbon 1 and resize by 30 percent, copy and paste as a new layer, place at the top of the tag behind the large circle. Apply a drop shadow.

Open Ribbon 2 and resize by 30 percent. Copy and paste as a new layer. Place at the bottom of the tag under the large circle. Apply a drop shadow.


Open Double Hearts 2 and resize by 15 percent. Copy and paste as a new layer. Place at the bottom on the left hand side. Apply a drop shadow.

Open Double Hearts 1 and resize by 15 percent. Copy and paste as a new layer, place at the bottom on the right hand side, apply a drop shadow.

Copy and paste the full body tube, place to your liking and apply a drop shadow.

Resize all layers again by 90 percent.

Add any copyrights and your name.

Crop, save as a PNG

Thank you for using one of my tuts, I hope you have enjoyed using it. I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using one by Ismael Rac found here
Scrap kit Love Me by Annuzattair found at Creative Misfits
Template 151 by Blissfully Beth
Mask of choice

Open the template, duplicate and close the original. Delete the copyright and resize all layers by 90 percent. Resize canvas by 700 x 700.

Select the grey oval, go to Selections - Select All - Float - Defloat.

Open a paper of choice, resize if desired, copy and paste as a new layer above the selected layer, position to your liking, go to Selections - Invert and hit delete on your keyboard. Delete the template layer.

Repeat the above steps for the remaining template layers, apply drop shadows to the frames.

Open ele 19 and resize by 90 percent, copy and paste as a new layer. Place on top of the circle in the center of the template. Apply a drop shadow.

Open ele 13 and resize by 30 percent. Copy and paste as a new layer. Place at the top of the tag in the center of the rectangle frame. Apply a drop shadow.

Open ele 53 and resize by 20 percent. Copy and paste as a new layer, place on the left hand side. Apply a drop shadow, duplicate, mirror and place on the right hand side.

Open ele 27, resize by 50 percent, copy and paste as a new layer, place at the bottom of the tag above the white background layer. Apply a drop shadow. Duplicate, mirror and flip. Reposition at the top if needed.

Open ele 48 and resize by 30 percent, copy and paste as a new layer. Place around the edge of the tag to your liking, duplicate as many times as desired. Apply drop shadows to all glitter.

Open ele 35, resize by 20 percent, mirror. Copy and paste as a new layer. Place on the left hand side next to the word art “Be Mine”. Apply a drop shadow. See my tag for placement if needed.

Open ele 36 and resize by 20 percent. Copy and paste as a new layer. Place on the right hand side a little higher up than the last one. Apply a drop shadow. See my tag for placement if needed.

Open ele 32 and resize by 30 percent, copy and paste as a new layer. Place the bow at the bowwow of the word art. Apply a drop shadow.

Copy and paste the tube as a new layer and place about in the center of the tag. Resize if needed. Apply a drop shadow.

Open ele 46 and resize by 50 percent, copy and paste as a new layer. Place in the center of the heart attached to the stool. Apply a drop shadow.

Open ele 37 and resize by 20 percent, go to Image - Rotate Left, copy and paste as a new layer. Place on the left hand side under the bow ribbon. Apply a drop shadow.

Open ele 38 and resize by 20 percent, go to Image - Rotate Left, copy and paste as a new layer. Place behind the rose we just added, apply a drop shadow.

Open ele 39, resize by 20 percent, go to Image - Rotate Left, copy and paste as a new layer. Place offset to the rose we just added, apply a drop shadow.
Copy and paste a paper of choice, apply the mask to this layer. Delete the mask layer and merge group. Resize if needed.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

Thank you for trying one of my tuts, I hope you have enjoyed using it. I would love to see what you have created.

Supplies Needed:
Tube of choice, regular and close-up, I am using the talented Ismael Rac found here
Scrap kit Beary Much Love by Kristen at Mystical Illusionz, you can find the kit at SATC
Template 102 by Simone
Xero Plugin (Soft Vignette and Porcelain) Optional

Open template, duplicate and close the original. Delete the copyright and resize canvas by 700 x 700. Flood fill the bg layer with white.

Select the circle layer, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. I resized the paper by 60 percent. Once happy go to Selections - Invert and hit delete on your keyboard. Apply a drop shadow and delete the template layer.

Repeat above steps for remaining template layers.

Okay, now select the rectangle layer that’s on top of the others, go to Selections - Select All - Float - Defloat.

Copy and paste the close-up above the selected layer. Once happy with the placement go to Selections - Invert and hit delete on your keyboard.

Make sure your still on your tube layer go to Effects and find the Xero plugin - Soft Vignette and apply using the default settings. Using Xero again find Porcelain and apply using the default settings. Change the Blend Mode to Hard Light.

Now for the elements….

Open ele 01, resize by 70 percent, copy and paste as a new layer above the circle layer. Position to your liking, with the Magic Wand click inside the frame, go to Selections - Modify - Expand by 5. Select the circle layer, go to Selections - Invert and hit delete on your keyboard. Apply a drop shadow to the frame layer.

Open ele 33 and resize by 30 percent. Copy and paste as a new layer, place at the bottom right hand corner of the rectangle with the tube. Apply a drop shadow.

Open ele 34, resize by 40 percent. Copy and paste as a new layer, place at the top left corner of the tall rectangle on the right hand side. Apply a drop shadow.

Open ele 08, resize by 12 percent, copy and paste as a new layer, place in the center of the bow we just added. Apply a drop shadow.

Open ele 17 and resize by 40 percent. Copy and paste as a new layer. Place the large flower on the bottom at the corner of the rectangle with the tube. Apply a drop shadow.

Open ele 18, resize by 40 percent. Copy and paste as a new layer, place on the outside of the circle heart frame. Apply a drop shadow.

Open ele 13, resize by 40 percent and then again by 50 percent. Copy and paste as a new layer to your liking, apply a drop shadow and duplicate as many times as you desire.

Open ele 23, resize by 50 percent twice, go to Image - Free Rotate and rotate left 25 degrees, copy and paste as a new layer, place to your liking. I placed one at the lower corner of the tube. Apply a drop shadow, duplicate as many times as you desire.

Open ele 27, resize by 15 percent. Copy and paste as a new layer. Place at the bottom of the tag on the left hand side. Apply a drop shadow.

Open ele 05, resize by 50 percent. Copy and paste as a new layer, place above the white background, position so the flowers are seen. Duplicate, and move to your liking, do this as many times as you desire.

Copy and paste the tube as a new layer, I mirrored mine, place on the left hand side. Then I apply the Xero Porcelain plugin on the same default setting as before. Apply a drop shadow.

I added the words “Beary Much Love” to the right side of the tag.

Resize all layers by 90 percent.

Add any copyrights and your name.

Crop, resize again of desired. Save as a PNG.

Thank you for trying one of my tuts, I hope you have enjoyed doing it, I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using Ismael Rac, you can find him here
Scrap kit Kiss Kiss by Soxie
Template 153 by Blissfully Beth
Mask of choice

Open the template, duplicate and close the original. Delete the copyright.

Select the grey oval, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer, position to your liking, go to Selections - Invert and hit delete on your keyboard. Apply a drop shadow. Delete the template layer.

Repeat above steps for the remaining template layers except for the word art.

Select the top rectangle line, go to Effects - Texture Effects - Blinds
Settings:
Width - 2
Opacity - 30
Color: White
Horizontal - Checked
Light from Left/Top - Checked

Apply this to the bottom rectangle as well.

Copy and paste the tube as a new layer below the frame layer, resize if needed. Position to the far left inside the rectangle. Erase any of the tube outside the frame. Apply a drop shadow.  Using the same blind setting we did for the lines apply this to the tube.

Repeat above for the right hand side of the large rectangle.

Copy and paste a paper of choice above the white background, apply the mask to this layer. Delete the mask layer and merge group. Resize if needed.

Copy and paste the tube again, place in the middle of the template. Erase any of the tube that’s showing at the bottom below the word art. Apply a drop shadow. Move this layer below the word art and the black hearts if not already done.

Open Pearls 2, resize by 60 percent. Copy and paste as a new layer. Place the star between the “L” and “O” in the word LOVE. Apply a drop shadow.

Open Elegant Bow, resize by 30 percent. Copy and paste as a new layer, place on the left hand side at the top of the frame, apply a drop shadow, duplicate, mirror. Reposition on the right if needed.

Open Lips, resize by 25 percent, copy and paste as a new layer. Place next to the “e” in the word LOVE. Apply a drop shadow. Duplicate and mirror. Position at the top on the left hand side above the tube.

Open Heart Box 1, resize by 25 percent, go to Image - Free Rotate and rotate left 12 degrees. Copy and paste as a new layer. Place on the left hand side in the bottom corner of the frame. Apply a drop shadow. Duplicate and mirror, place above the tube on the right hand side.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

I hope you have enjoyed using one of my tuts, I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using Jose Cano found at PTE
Scrap kit Love Hearts by Jaelop Designs
Template 9 by Juice Bits
Mask of choice

Open the template, duplicate and close the original. Delete the copyright, lips and string layers. Resize canvas 700 x 700.

Select the big heart layer, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer, position to your liking, go to Selections - Invert and hit delete on your keyboard. Delete the template layer. Apply a drop shadow.

Repeat this for the remaining template layers.

Select the rectangle on the left hand side, go to Selections - Select All - Float - Defloat.

Copy and paste the tube as a new layer. Place inside the selected rectangle. Resize if needed, go to Selections - Invert and hit delete on the keyboard. Apply a drop shadow. Change the blend mode to Luminance (Legacy).

Select the rectangle on the right hand side, go to Selections - Select All - Float - Defloat.

Copy and paste the tube as a new layer. Place inside the selected rectangle. Resize if needed, go to Selections - Invert and hit delete on the keyboard. Apply a drop shadow.  I applied a photo effects to this tube, this is up to you. Go to Effects - Photo Effects and pick one you like.

Open Element 31 and resize by 15 percent. Copy and paste as a new layer above the large heart layer. Place on the right hand side on top of the large heart.

Select the large heart, go to Selections - Select All - Float - Defloat. Select the word art, go to Selections - Invert and hit delete on your keyboard.

Open Element 15 and resize by 20 percent, copy and paste as a new layer, place at the bottom of the two rectangles. Apply a drop shadow.

Open Element 26 and resize by 6 percent. Copy and paste as a new layer, place on the right hand side at the top of the large heart. Apply a drop shadow.

Open Element 23 and resize by 15 percent, go to Image - Free Rotate and rotate left 10 degrees. Copy and paste as a new layer. Place above the rectangle on the left. Apply a drop shadow. Duplicate, mirror and place a little below and to the right of the heart we just added.

Open Element 24 and resize by 20 percent. Copy and paste as a new layer. Place behind the two glitter hearts we just added.

Open Element 2 and resize by 15 percent, go to Image - Free rotate and rotate right 10 degrees. Copy and paste as a new layer. Place at the bottom of the rectangle on the right hand side. Apply a drop shadow.

Open Element 1 and resize by 12 percent. Copy and paste as a new layer. Place above the white background layer. Position to the left so its out past the template layers. Apply a drop shadow. Duplicate, mirror and place on the right hand side doing the same.

Copy and paste the tube as a new layer. Resize if needed. I placed mine on the left hand side.
Select the word art “Heart Strings” apply a gradient glow or a nice drop shadow.

Copy and paste a paper of choice above the white background layer. Apply the mask to this layer. Delete the mask layer and merge group. Resize if needed.

I also resize the word art included in the kit and applied the same mask to it.

Add any copyrights and your name.

Crop, resize if needed. Save as a PNG.

I hope you have enjoyed using one of my tuts, I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using Unholy Vault Designs found at PTE
Scrap kit Somebody to Love by Fantasy Moments
Template 152 by Blissfully Beth
Mask of choice
My supplies (word art) here

Open the template, duplicate and close the original. Delete the copyright and heart 1 and 2. Resize canvas by 700 x 700.

Select the black oval layer, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer, position to your liking, go to Selections - Invert and hit delete on your keyboard. Delete the template layer. Apply a drop shadow.

Repeat this for the remaining template layers.

Copy and paste a paper of choice above the white background. Apply the mask to this layer. Delete the mask layer and merge group. Resize if needed.

Copy and paste the word art included in my supplies as a new layer, place below the frame layer of the oval.

Open Element 16 and resize by 40 percent. Go to Image - Free Rotate, rotate left 12 degrees. Copy and paste as a new layer. Place in the bottom left hand corner. Apply a drop shadow. Duplicate, mirror and place in the upper right hand corner.

Open Element 24 and resize by 60 percent. Go to Image - Rotate Left, copy and paste as a new layer. Place at the bottom of the tag. Apply a drop shadow.

Open the red ribbon, resize by 60 percent. Copy and paste as a new layer. Place at the top of he oval. Apply a drop shadow.

Open Element 77 and resize by 25 percent. Copy and paste as a new layer. Place on the left hand side on top of the oval frame. Apply a drop shadow. Duplicate and place at the bottom right hand side.

Open Element 78 and resize by 20 percent. Copy and paste as a new layer. Place overlapping the flower we just added on the left. Apply a drop shadow. Duplicate and move to the right overlapping that flower.

Copy and paste the tube as a new layer, resize if needed. I place mine below the “oh Baby” word art. Apply a drop shadow.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

I hope you have enjoyed using one of my tuts, I would love to see what you have created.

Supplies Needed:
Tubes of choice (regular and close-up), I am using one of Keith Garvey purchased from MPT but you can find him at PTE now.
Scrap kit Is This Love by Bea Creations
Template 80 by Addictive Templates
My supplies (stitches and staple) here

All ready to begin, lets get started :)

Open the template, duplcate and close the original. Delete the copyright layer.

Resize the entire template by 90 percent.

Go to Image, canvas and use the settings 700 x 700. Foold fill the white background with white.

Select the large circle (not the white one, but the pink), go to Selections - Select All - Float - Defloat.

Copy and paste a paper of your choice above the circle. Posistion to your liking, you make want to resize. Once your happy witth how it looks, go to Selections - Invert and hit delete on your key board.

Delete the template layer.

Repeat this for all the template layers.

Apply a drop shadow to the white layers. They should be the edges to the ones you replaced with papers.

Change the text layer to an overlay.

The word art "im yours" I used the Color Changer tool to change it to black. If you don't have this you can leave it like it is or change it your own way. Apply a drop shadow.

Select the small heart paper on the left hand side. Go to Selections - Select All - Float - Defloat.

Copy and paste your smaller tube as a new layer. Position inside the heart to your liking. Once happy go to Selections - Invert and hit delete on your key board. Apply a drop shadow.

Do the same for the heart on the right. I mirrored my tube. Apply a drop shadow.

Copy and paste the close-up as a new layer. Position to your liking, erase anything of the tube you don't like. Apply a drop shadow.

Open Ticket 1 and resize by 60 percent. Paste as a new layer at the top of the large circle. Apply a drop shadow.

Open Flower 1 and resize by 50 percent. Paste as a new layer overlapping the ticket. Apply a drop shadow.

Open Butterfly 1 and resize by 30 percent. Paste as a new layer, I placed mine on the word art at the bottom, apply a drop shadow. Duplicate, mirror and place on the word "gift". You can duplicate as many as you like and put them wherever you prefer.

Open Flower 2 md resize by 40 percent. Paste as a new layer. Position on the left overlapping the small heart. Apply a drop shadow. Duplcate and place on the right side near the heart.

Copy and paste the stitches as a new layer, place them over top the small heart on the left. Apply a drop shadow.

Copy and paste the staple as a new layer, place on the other small heart on the right. Apply a drop shadow.

Copy and paste a paper pf your choice above the white background layer. Apply the mask to this layer. Delete the mask layer and merge.

Add any copyrights.

Add your name.

Crop, resize if desired.

Save as a PNG.

You now have a new tag, awesome! I hope you have enjoyed using one of my tuts I would love to see what you have created!

Supplies Needed:
Tube of choice, I am using one of Keith Garvey purchased at MPT, you can find him now at PTE
Scrap kit My Valentine by Fantasy Moments
My Supplies here (includes ribbon, key, staple and word art)
Mask of choice

Open a new image 700 x 700 with a white background.

Open Element 74 and resize by 60 percent. Copy and paste as a new layer. Click inside the frame with the Magic Wand. Go to Selections - Modify - Expand by 5.

Open a paper of choice and paste as a new layer below the frame. Position, resize to your liking, go to Selections - Invert, hit delete on your key board.

Open a paper and paste as a new layer above the white background, apply the mask to this layer. Delete the mask layer and merge group.

Open the ribbon included in my supplies, copy and paste as a new layer behind the frame and frame background. Place at the top of the frame. Apply a drop shadow, duplicate and move to the bottom of the frame.

Copy and paste the tube as a new layer, position inside the frame. Erase any of the tube outside the frame you don’t want showing. Apply a drop shadow.

Open Element 35 and resize by 30 percent. Copy and paste as a new layer in the upper left corner. Apply a drop shadow.

Open the key included in my supplies and copy and paste as a new layer placing near the knot in the wire heart. Erase some of the hoop to make it look attached.

Open the staple and copy and paste as a new layer above the key.

Open Element 4 and resize by 50 percent, mirror. Copy and paste as a new layer at the bottom of the frame on top of the ribbon. Apply a drop shadow.

Open Element 36 and resize by 30 percent. Copy and paste as a new layer in the center of the wrapped ribbon you just placed. Move this layer below the wrapped ribbon. Apply a drop shadow.

Open Element 9 and resize by 25 percent. Copy and paste above the heart you just placed. Move this layer below the wrapped ribbon and hanging heart. Apply a drop shadow.

Open Element 69 and resize by 40 percent, mirror. Copy and paste in the lower right hand corner in front of the wrapped ribbon. Apply a drop shadow.

Open Element 58 and resize by 40 percent. Copy and paste as a new layer in the upper right hand corner. Apply a drop shadow. Duplicate, move to the lower left hand corner. Move this layer below the frame background.
Open the word art, copy and paste as a new layer on the left hand side just off the frame below the card. Duplicate and rotate right twice, place this on the right side just above the glasses.

Add any copyrights and your name.

Crop, Resize if desired.

Save as a PNG

I hope you have enjoyed using one of my tuts. I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using one of Keith Garvey purchased from PTE
Scrap kit Be Mine by Sanie
My Supplies found here (Mask and Frame)

Open a new image 700 x 700 with a white background.

Open my supplies and copy and paste as a new layer.

Copy and paste the frame as a new layer. Click inside the frame, go to Selections - Modify - Expand by 15.

Open a paper of choice, copy and paste as a new layer below the frame. Go to Selections - Invert and hit delete on your key board.

Open Element 53, copy and paste as a new layer above the mask layer. Move down so that the rose is out past the frame on the bottom. Apply a drop shadow. Duplicate, flip, and move so that the rose is out past the frame at the top. Erase any of the frame at is overlapping on the sides.

Open Element 19, copy and paste as a new layer above the heart you just added. Move to one side so that the ribbon is showing at the top and bottom. Apply a drop shadow. Duplicate, mirror and flip. Reposition if needed.

Copy and paste the tube as a new layer inside the frame. Erase any of the tube that is out past the frame you don’t want showing. Apply a drop shadow.

Open Element 15, go to Image - Rotate right. Copy and paste as a new layer at the bottom of the frame. Apply a drop shadow.

Open Element 73 and resize by 50 percent. Copy and paste as a new layer on the left hand side near the top of the frame. Apply a drop shadow. Duplicate, mirror.

Open Element 58 and resize by 60 percent. Copy and paste as a new layer, place below the pink rose on the left side. Apply a drop shadow. Duplicate, mirror. Reposition of needed.

Open Element 68 and resize by 40 percent. Copy and paste as a new layer. Place on top of the stems on the right side. Apply a drop shadow. Duplicate, mirror.

Open Element 11 and resize by 20 percent, go to Image - Free rotate and rotate right 10 degrees. You can place wherever you like, I placed mine down near the flower at the bottom of the tag, apply a drop shadow. I then duplicate, mirror and placed this one at the top of the tag on the right. This is totally up to you.

Add any copyrights and your name.

Crop, resize if desired.

Save as a PNG.
Now go show off your new creation! I hope you have enjoyed using one of my tuts. I would love to see what you have created.