Supplies Needed:
Tube of choice, I used one done by Anna Liwanag from MPT (closed), but you can find her at PFD now.
Scrap kit: Princess by Inzpired Creationz found here
Template: SSAM_TagTemp40 made by Scrapity Scrap & More found here
My Supplies: Word art and Doodle found here

Open the template, duplicate, and close the original. Delete the copyright layer. Resize by 700 x 700. Flood fill the background layer with white.

I resized all papers by 80%.

Open a paper of choice, select Big Circle, go to Selections - Select All - Float - Defloat. Copy and paste the paper above this layer, go to Selections - Invert and hit delete on the keyboard. Go to Selections - Select None.

Repeat this for all desired layers. Apply a drop shadow to all layers.

Open Sparkles 1, duplicate, and close the original. Copy and paste as a new layer. Place in the center of the template.

Open Boxes, duplicate and close the original. Resize by 60%. Copy and paste as a new layer. Place on the lower right-hand side of the template apply a drop shadow.

Open the doodle that was included in my supplies, copy, and paste as a new layer in the upper left-hand corner of the square.

Open Mirror, duplicate and close the original. Resize by 60%. Copy and paste as a new layer. Mirror, and place on the left-hand side of the template. Apply a drop shadow. 

Open Cat, duplicate and close the original. Resize by 60%, duplicate add a drop shadow to both cats. Copy and paste as a new layer. Place inside the mirror, position so its one eye and ear are inside. Erase only of the cat outside the mirrors frame. Mirror the second cat, copy and paste as a new layer. Place in the lower left-hand side of the circle below the doodle. 

Open Crown, duplicate and close the original. Resize by 40%, mirror. Copy and paste as a new layer. Place above the stack of boxes on the right. Apply a drop shadow.

Open Cupcake 1, duplicate and close the original. Resize by 40%. Copy and paste as a new layer. Place between the mirror and the cat. Apply a drop shadow.

Open Star 2, duplicate and close the original. Resize by 30%. Copy and paste as a new layer. Place at the top of the doodle. Apply a drop shadow.

Open Wand, duplicate, and close the original. Resize by 40%, and mirror. Copy and paste as a new layer. Place on the right-hand side at the bottom of the boxes. Apply a drop shadow.

Open Lip Gloss, duplicate and close the original. Resize by 50%. Copy and paste as a new layer. Place in front of the boxes. Apply a drop shadow.

Open Rose 3 and 4, duplicate both and close the original. Resize the pink one by 20% and resize the white one by 15%. Copy and paste the pink rose next to the wand on the right-hand side. Apply a drop shadow. Copy and paste the white rose overlapping the pink rose on the left side. Apply a drop shadow.

Open Rose 2, duplicate and close the original. Resize by 15%. Copy and paste as a new layer. Place on the left-hand side in front of the mirror and cupcake. Apply a drop shadow.

Select your tube, copy and paste as a new layer. If needed resize to fit the template. Place in the center of the template. I moved mine down so that the bottom of the tube is near the bottom of the circle, you can peek at my tag for reference if needed. Apply a drop shadow.

Open Pearls 3, duplicate and close the original. Copy and paste as a new layer. Place at the bottom in front of the tube, apply a drop shadow. Erase any of the pearls that you do not like.

Open both word arts included in my supplies, copy and paste Princess at the bottom for the template. Position between the roses. Copy and paste the remaining word art above the word Princess.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you have enjoyed yourself and I look forward to having you back here again!! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using SkyScraps found at SATC
Scrap kit Divalicious by Inzpired Creationz also found at SATC
Template 18 by CBN 
Mask of choice

Yep, I made a tag for my Yorkie, well she thinks she the Princess (and she is!)

Open the template, duplicate and close the original. Resize all layers by 110 percent. Delete the copyright and resize canvas by 700 x 700. Add a new layer at the bottom and flood fill with white.

Select Raster 5, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. Position to your liking. Go to Selections - Invert and hit delete on the keyboard. Delete the template layer. Apply a drop shadow.

Repeat the above steps for the remaining template layers.

Select the background for the heart on the right hand side, go to Selections - Select All - Float - Defloat. Copy and paste the tube as a new layer above the background. Position to your liking. Go to Selections - Invert and hit delete on the keyboard. Change the Blend Mode to Luminance (L). Do the same thing for the heart on the left hand side, you may want to mirror the tube.

Copy and paste the tube as a new layer. Place in the center of the tag behind the word art. Resize if needed and apply a drop shadow.

You may have to rearrange the word art around the tube, I moved mine down some.

Open Sparkles 3, resize by 40 percent. Copy and paste as a new layer. Place on top of the heart frame on the right hand side, duplicate and place in the left hand side, erase any you don’t like.

Open Ribbon 2, resize by 50 percent. Copy and paste as a new layer, place behind the template. Apply a drop shadow. Duplicate and place on the opposite side.

Open Present 1, resize by 30 percent. Copy and paste as a new layer. Place in the lower left hand side beside the word art. Apply a drop shadow.

Open Present 2, resize by 25 percent. Copy and paste as a new layer. Place in the lower right hand corner beside the word art. Apply a drop shadow.

Open Pillows, resize by 60 percent. Copy and paste as a new layer. Place behind the tube and position under her arms, this way it looks like she is laying on them. Apply a drop shadow, duplicate and place on the opposite side in the same manner.

Open Rose and Feathers 1, resize by 25 percent. Copy and paste as a new layer. Place on the left hand side near the top of her arm, move this layer below the tube. Apply a drop shadow. Duplicate and mirror. Place on top of the pillow on the right hand side.

Open Stars 4, resize by 40 percent. Copy and paste as a new layer. Place around the template to your liking. Duplicate as many as you like. Apply a drop shadow to all layers.

Add a new layer above the white background, flood fill with a gradient matching the tag. Apply the mask to this layer. Delete the mask layer and merge group.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you have enjoyed yourself and I look forward to having you back here again!! I would love to see what you have created.

Supplies Needed:
Tube of choice (full/half and close-up), I am using SkyScraps found at SATC
Scrap kit Drama Queen by Pink Candy Designs found at Scrappin Dollars
Template Tonya and Deb Collab 2 found here
Xero - Soft Mood
Mask of choice

Another REALLY awesome kit to match this REALLY cool tube!

Open the template, duplicate and close the original. Delete the copyright and resize all layers by 90 percent. Resize the canvas 700 x 700 and flood fill the background layer with white.

Select the layer Weirdass Shape 1, lol, that is the name, HONEST! Go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. Position to your liking. Go to Selections - Invert and hit delete on the keyboard. Delete the template layer. Apply a drop shadow.

Repeat the above steps for the remaining template layers.

Select the Square in the middle of the template. Go to Selections - Select All - Float - Defloat. Copy and paste the full or half tube as a new layer above the selected layer. I mirrored the one I used, position to your liking. Go to Selections - Invert and hit delete on the keyboard. Change the Blend Mode to Screen.

Select the Square in the lower right hand corner. Go to Selections - Select All - Float - Defloat. Copy and paste the full or half tube as a new layer above the selected layer, position to your liking. Go to Selections - Invert and hit delete on the keyboard. Apply Xero - Soft Mood using the default settings.

Copy and paste the close-up as a new layer. Place behind the word art, position to your liking at top of the large circle. Apply a drop shadow.

Open Glitter 2, copy and paste as a new layer. Place in the upper left hand corner to your liking on top if the circle. Apply a drop shadow. Duplicate and place on the right hand side above the weird shape.

Open Glitter 3, copy and paste as a new layer. Place at the bottom in the center of the template, apply a drop shadow. Duplicate and place at the top of the template.

Open Ribbon, copy and paste as a new layer. Place at the bottom of the template to your liking, move this layer above the white background. Apply a drop shadow. Duplicate, mirror and flip. Reposition at the top if needed.

Open Star, resize by 30 percent. Copy and paste as a new layer. Place to your liking and apply a drop shadow. Duplicate as many times as you like. See my tag for placement if you would rather use the same thing. Keep in mind there is nothing wrong with making it different, making it yours.

Open Sparkles, copy and paste as a new layer. I place mine in the center of the template behind the close-up and background.

Open Skull 2, resize by 30 percent, rotate left 8 degrees. Copy and paste as a new layer. Place to your liking. Apply a drop shadow. Duplicate as many times as you like.

Open Bear, resize by 40 percent. Copy and paste as a new layer. Place on the bottom left hand side next to the word art. Apply a drop shadow.

I added a white gradient glow around the word art and then a drop shadow. I also changed the color of the word art to match the tag. To do this make a gradient from two colors. Select the colored word art, go to Selections - Select All - Float - Defloat. Add a new layer above this one and flood fill with the gradient. Delete the other word art.

Using a nice font type out the words Drama Queen along the edge of the square we added the tube to on the left hand side. Apply a nice gradient glow, duplicate and place down some from the other one. Do the same thing at the top also, I had to change my color to black because of the paper I used.

Add a new layer above the white background. Apply the mask to this layer. Delete the mask layer and merge group.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you had fun and I look forward to having you visit again!! I would love to see what you have created.

Supplies Needed:
Tube of choice (full and close-up) I am using SkyScraps found at SATC
Scrap kit Drama Queen by Bibi’s Collections also from SATC
Template 428 by Missy
Mask of choice
Xero - Soft Vignette

I so LOVE this tube AND the scrap kit matches PREFECT!! Both are worth purchasing!

Open the template. Duplicate and close the original. Delete the copyright and star 3 and 4. Resize the canvas 700 x 700 and flood fill the back with white.

Select the layer shape 2, go to Selections - Select All - Float - Defloat.

Copy and paste a paper above the selected layer. Place to your liking, go to Selections - Invert and hit delete on the keyboard. Delete the template layer and apply a drop shadow.

Repeat the above steps for the remaining template layers.

Select the circle on the left, go to Selections - Select All - Float - Defloat.

Copy and paste the close-up tube as a new layer above the selected layer (I mirrored mine), position the tube to your liking. Go to Selections - Invert and hit delete on the keyboard. Apply Xero - Soft Vignette on default settings. Repeat this for the circle on the right hand side as well.

Open Element 62, resize by 80 percent. Duplicate and close the original. Go to Selections - Select All - Float Defloat. Make a gradient from two colors matching the tube. Add a new layer above the stars and flood fill with the gradient. Change the Blend Mode to Color (L). Merge the two layer. With the Selection tool select a star or two. Copy and paste as a new layer. Place to your liking on top of the tubes. Apply a drop shadow. Duplicate or pick different stars, do this until you have the stars to your liking.

Open Element 81, resize by 60 percent. Copy and paste as a new layer. Place in the upper left hand corner to your liking. Move this layer above the white background layer. Duplicate and mirror. Duplicate and flip. Duplicate and mirror. Now you should have glitter all around the template, reposition to your liking.

Open Element 74, copy and paste as a new layer. Place behind the circle on the left hand side. I changed the color of the wire to match the tube, this is up to you.  Apply a drop shadow. Duplicate and place on the right hand side behind the circle.

Open Element 17, resize by 40 percent. Copy and paste as a new layer. Place on top of the circle and tube on the left hand side. Position so the diamonds are around the edge of the circle. Apply a drop shadow. Duplicate and place in the same manner on the right hand side.

Copy and paste the tube as a new layer. Place behind the word art and strips. Resize if needed, apply a drop shadow.

Using the Selection tool, draw out a small strip above the strip containing the word art. Add a new layer above the tube, flood fill with a color from the tube. Apply a drop shadow.

Using a small font of choice type out a saying or quote of your liking. Apply a drop shadow to the word art. Merge the strip and word art together. Duplicate and place below the strip with the word art I Refuse…

Open Element 18, copy and paste as a new layer. Place on top of the word art to your liking.

Open Element 48, resize by 50 percent. Copy and paste as a new layer. Place in front of the tube on the left hand side. Apply a drop shadow.

Open Element 25, resize by 60 percent, rotate left 8 degrees. Copy and paste as a new layer. Place on the left hand side just below the strip that was added. Apply a drop shadow.

Open Element 32, resize by 30 percent, mirror. Copy and paste as a new layer. Place above the label that was just added. Apply a drop shadow.

Open Element 13, resize by 40 percent, rotate right 8 degrees. Copy and paste as a new layer. Place on the left hand side on top of the diamond circle on the right hand side. Apply a drop shadow.

Add a new layer above the white background, flood fill this the gradient used earlier. Apply the mask to this layer. Delete the mask layer and merge group.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close the background layer first).

Thank you for trying one of my tuts, I hope you have enjoyed yourself and I look forward to having you come back again! I would love to see what you have created.

Supplies Needed:
Tube of choice (full and close-up, I am using Keith Garvey found at PTE
Scrap kit Biker Bitch by Inzpired Creationz, you can find this HUGE kit at SATC
Template 59 by Pooker
My supplies (word art and mask) here
Eyecandy 4000 - Gradient Glow

Open the template, duplicate and close the original. Delete the copyright. Resize canvas by 700 x 700. Flood fill the background layer with white.

Select the large circle on the right hand side, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer, position to your liking, go to Selections - Invert and hit delete on the keyboard.

Repeat the above steps for the remaining template layers, I opened the color palette and used some of the solid colors for layers.

Select the large circle on the right hand side, go to Selections - Select All - Float - Defloat.

Copy and paste the close-up above the selected layer (I mirrored mine), position to your liking, go to Selections - Invert and hit delete on the keyboard. Change the Blend Mode to Hard Light.

Select the large circle on the left hand side, go to Selections - Select All - Float - Defloat.

Copy and paste the close-up above the selected layer, position to your liking, go to Selections - Invert and hit delete on the keyboard. Change the Blend Mode to Screen.

Select the small circle on the right hand side, go to Selections - Select All - Float - Defloat.

Copy and paste the close-up above the selected layer (I mirrored mine), position to your liking, go to Selections - Invert and hit delete on the keyboard. Change the Blend Mode to Multiply.

Select the small circle on the left hand side, go to Selections - Select All - Float - Defloat.

Copy and paste the close-up above the selected layer, position to your liking, go to Selections - Invert and hit delete on the keyboard. Change the Blend Mode to Multiply.

Add a drop shadow or Gradient Glow to the rest of the layers.

Open City Scene, resize by 60 percent. Copy and paste on top of the large circle on the left hand side, this should be able the square in the center of the template. Apply a drop shadow. Duplicate, mirror. Place behind the large circle on the right hand side that contains the tube.

Open Bullet Holes, resize by 50 percent. Copy and paste as a new layer. Place to your liking, I added mine to the two large circles with the tube. Low  Opacity to 80.

Open Winged Heart 1, resize by 40 percent, rotate left 8 degrees. Copy and paste as a new layer. Place below the strip at the top on the left hand side. Apply a drop shadow.

Open Bottle 2, resize by 40 percent. Copy and paste as a new layer. Place at the bottom on the left hand side next to the strip. Apply a drop shadow.

Open Whip, resize by 50 percent. Copy and paste as a new layer. Place in front of the bottle. Apply a drop shadow.

Copy and paste the tube as a new layer. Place behind the bottom strip. Resize if needed and apply a drop shadow.

Open Sparkles 2, resize by 80 percent. Copy and paste as a new layer. Place on top of the tube to your liking, duplicate and position at the top of the template on top of the city.

Open Cuffs 1, duplicate, resize one by 40 percent and one by 20 percent. Copy and paste the smaller pair of cuffs as a new layer. Place on top of the motorcycle handlebars. Erase some of the cuff so it looks like they are hanging there. Copy and paste the larger cuffs as a new layer. Place at the top of the template on the left hand side, position so they look to be hanging from the strip, erase some of the cuff. Apply a drop shadow to both layers.

Copy and paste the mask layer above the white background, you can always use your own too. Position to your liking.

Copy and paste the word art top left, place above the dotted line on the left hand side.

Copy and paste the word art bottom right, place below the dotted line ion the right hand side.

Copy and paste the word art for the strip, place inside the strip, duplicate and place at the bottom.

Copy and paste both word arts Biker Bitch.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you have enjoyed yourself and I look forward to having you back here again! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using SkyScraps found at SATC
Screw or fastener of choice
My Supplies (word art) here
Eyecandy 4000 - HSB Noise
Penta.com - Dot and Cross

Open a new image 400 x 250, this is going to be the center of the tag.

Add a new layer, make a gradient out of two colors from the tube, flood fill this layer with the gradient.  Apply Eyecandy 4000 - HBS Noise, I used these settings:
Hue Variation - 8
Saturation Variation - 10
Brightness Variation - 11
Pattern - Smooth Fractal
All rest are left on default settings, you can always mess around with the settings for something else you may like. Apply Penta.com - Dot and Cross using these settings:
Amount - 72
Cross Distance - 10
Cross Width - 2

Copy and paste the tube as a new layer, place in the center and to the right a little, apply a drop shadow and change the Blend Mode to Luminance (L). I lower the Opacity to 85.

Copy and paste the tube as a new layer, resize if needed. Apply a drop shadow. Place on the left hand side.

Okay, now open a new Image 600 x 250, add a new layer and flood fill with the same gradient only switch the two colors. Apply the same HSB Noise as you used earlier.

Go back to the image with the tube, copy MERGED. Paste as a new layer in the image that we just made.

Using the Selection tool draw out a small strip along the image with the tube, this should go from the top to the bottom. Add a new layer above the image with the tube, flood fill with the gradient. Apply a drop shadow to the strip. Repeat this for the right hand side as well.

Still using the Selection tool draw out a strip at the bottom of the tag, just big enough for the image with the tube. See my tag if needed, this is where the phrase/saying will be added. Add a new layer and flood fill again with the gradient, you may need to switch the colors. Apply a drop shadow. Move this layer below the two strips we made for the sides of the layer with the tube.

Copy and paste the screw/fastener as a new layer, place at the ends on top of the strips. Apply a drop shadow.

Add a saying of choice inside the strip at the bottom of the tag, I used Talking behind my back?  While you’re there… Apply a drop shadow or gradient glow.

Copy and paste the word art Kiss my ass as a new layer, place to the left of the image with the tube. Move this layer above the gradient. Duplicate and placed on the right hand side.

To add the frame, select the gradient, go to Selections - Select All - Float - Defloat. Back to Selections - Modify - Select Selection - Borders and I used 5. Add a new layer above the others and flood fill once again with the gradient. To add the small white frame repeat the steps again this time use 5 and add a new layer below the gradient and flood fill with white. Apply a drop shadow to the white frame and merge the two frame layers.

Add any copyrights and your name. Save as a PNG.

Thank  you for trying one of my tuts, I hope you have enjoyed yourself and I look forward to having you come back for more!! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using SkyScraps found at SATC
Scrap kit Kiss This by Alika’s Scraps also found at SATC
Template 336 by Missy
Mask of choice

Open the template, duplicate and close the original. Resize all layers by 90 percent. Delete the copyright, resize canvas by 700 x 700, and flood fill background with white.

Select the large circle, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer (I changed the color of the paper to match the tube). Resize paper if needed, position to your liking. Go to Selections - Invert and hit delete on the keyboard. Delete the template layer. Apply a drop shadow.

Repeat the above steps for the remaining template layers.

Select the star on the left hand side, go to Selections - Select All - Float - Defloat.

Copy and paste the tube as a new layer, position inside the star to your liking, go to Selections - Invert and hit delete on the keyboard. Apply one of your favorite filters. Repeat the same thing for the star on the right hand side.

Copy and the tube again, this time place in the center of the template. Resize if needed and apply a drop shadow.

Open as64, resize by 40 percent, rotate right 8 degrees. Copy and paste as a new layer. Place in the upper left hand corner overlapping the star. Apply a drop shadow.

Open as73, resize by 40 percent. Copy and paste as a new layer placing in the bottom left corner of the ticket. Apply a drop shadow. Duplicate and mirror, place at the bottom of the star with the tube on the right hand side.

Open as72, resize by 30 percent. Copy and paste as a new layer. Place on the right hand side at the top of the star with the tube. Apply a drop shadow. Duplicate and place at the top of the ticket in the opposite corner.

Open as68, resize by 40 percent. Copy and paste as a new layer, place above the star on the right hand side. Apply a drop shadow. Duplicate and mirror. Place at the bottom of the star on the left hand side.

Open as57, resize by 40 percent. Copy and paste as a new layer, placing at the bottom of the template on the right hand side of the tube. Apply a drop shadow.

Open as19, copy and paste as a new layer, place at the bottom left of the template. Apply a drop shadow. Duplicate and place at the top right. Move these two layers below the others until you have it where you like it.

Duplicate the strip at the bottom of the template. Move this layer above the others and rotate left 8 degrees. Using a font of choice add a saying or quote, I used …and I DON’T mean on my rosey red lips! Merge the strip and word art together. Duplicate and rotate 8 degrees to the right. Move this layer to the top of the template, place behind the tube.

Open as43, resize 50 percent. Copy and paste as a new layer. Place at the end of the strip on the left hand side, apply a drop shadow, duplicate and place at the other end.

Add a new layer above the white background, make a gradient out of two colors from the tube, flood fill this layer with the gradient. Apply the mask to this layer. Delete the mask layer and merge group.

Add any copyrights and your name. Crop, resize if  desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you enjoyed it and I look forward to having you back here again! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using SkyScraps found at SATC
Scrap kit Kiss This by Alika’s Scraps also found at SATC
Template 61 by Pooker
My Supplies (word art and mask) here

Open the template, duplicate and close the original. Resize all layers by 70 percent. Delete the copyright, resize canvas by 700 x 700, and flood fill background with white.

Select Back Rectangle, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. Resize paper if needed, position to your liking. Go to Selections - Invert and hit delete on the keyboard. Delete the template layer. Apply a drop shadow.

Repeat the above steps for the remaining template layers.

Select the large circle on the left hand side, go to Selections - Select All - Float - Defloat.

Copy and paste the tube as a new layer, position inside the circle to your liking, go to Selections - Invert and hit delete on the keyboard. Change the Blend Mode to Luminance (L). Repeat the same thing for the circle on the right hand side.

Select the small square that’s overlapping the circle with the tube on the left hand side, go to Selections - Select All - Float - Defloat.

Copy and paste the tube as a new layer, position inside the circle to your liking, go to Selections - Invert and hit delete on the keyboard. Change the Blend Mode to Screen. Repeat the same thing for the square on the right hand side.

Copy and paste the circle word art included in my supplies. Place inside the circle in the center of the template.

Using a font of choice, type out the word SMOOCHES in the center of the strip on the left hand side. Apply a drop shadow. Using a different color repeat the same thing for the right hand side.

Copy and paste the tube as a new layer, place in the center of the template. Resize if needed and apply a drop shadow.

Open as68, resize by 40 percent, mirror. Copy and paste as a new layer. Place on the lower left hand side below the word Smooches. Apply a drop shadow.

Open as67, resize by 40 percent. Copy and paste as a new layer. Place on the right hand side below the word Smooches. Apply a drop shadow.

Open as52, copy and paste as a new layer. Place in the top left hand corner of the template. Apply a drop shadow, duplicate, mirror and flip, reposition in the lower right hand corner if needed.

Open as51, copy and paste as a new layer. Place in the upper right hand corner of the template. Apply a drop shadow. Duplicate, mirror and flip, reposition in the lower left hand corner if needed.

Open as39, resize by 20 percent. Copy and paste as a new layer, place overlapping the strip with the word Smooches. Apply a drop shadow. Duplicate and repeat on the opposite side.

Open as73, resize by 50 percent. Copy and paste as a new layer, place on the left hand side next to the square with the tube. Apply a drop shadow.

Open as72, resize y 35 percent. Copy and paste as a new layer. Place overlapping the black star we just added. Apply a drop shadow. Duplicate and place behind the tube on the right hand side.

Copy and paste the mask as a new layer above the white background. Position to your liking.

Copy and paste the word art Kiss This included in my supplies, place above the dotted line in the left hand corner. Duplicate and place in the lower right hand corner below the dotted line.

Using the Selection tool, select two of the Kiss This, rotate left and place on the outside of the dotted line at the top on the left hand side. Repeat this for the bottom right hand side only rotate right instead of left.

Add any copyrights and your name, crop and resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tutorials, I hope you had fun and I look forward to having you back here again!! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using Keith Garvey found at PTE
Scrap kit Urban Glam by Tasha’s Playground, you can purchase this kit at SATC and PFD
Template 32 by Pooker found here
My supplies (mask and word art) here

Open the template, duplicate and close the original. Delete the copyright and crossed lines layers. Resize all layers by 110 percent. Resize canvas by 700 x 700 and flood fill Raster 1 with white.

Select H Rectangle, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. Position to your liking, go to Selections - Invert and hit delete on the keyboard. Delete the template layer.

Repeat the above steps for the remaining template layers.

Select the large circle on the left, go to Selections - Select All - Float - Defloat.

Open Cityscape (do not close), copy and paste as a new layer, place inside the circle to your liking. Go to Selections - Invert and hit delete on the keyboard. Copy and paste Cityscape again, this time position to the right behind the top rectangle. Apply a drop shadow.

Select the smaller circle on the left hand side, go to Selections - Select All - Float - Defloat.

Copy and paste Cityscape one last time, position inside the small circle to your liking, go to Selections - Invert and hit delete on the keyboard. (keep selected)

Copy and paste the tube as a new layer inside the selected circle, position to your liking. Hit delete on the keyboard. Change the Blend Mode on the cityscape and tube to Screen.

Apply a drop shadow to all template layers.

Merge the small circle, tube, Cityscape and dotted circle together. Duplicate, mirror. Place on the right hand side above the square in the middle of the template. See my tag if needed.

Copy and paste the circle word art inside the large circle on the left hand side. Place this layer below the Cityscape. Change the Blend Mode to Soft Light.

Open Broken Glass, copy and paste as a new layer. Place on the left hand side inside the large circle. Apply a drop shadow.

Copy and paste the tube as a new layer. Place in the center of the template. Resize if needed. Apply a drop shadow.

Open Record, resize by 60 percent. Copy and paste as a new layer. Place on the right hand side at the bottom behind the tube. Apply a drop shadow. Duplicate and place at the top still behind the tube on the left hand side.

Open Star, resize by 60 percent. Copy and paste as a new layer. Place on the left hand side at the top of the small circle. Duplicate, and place on the right hand side on top of the record, position to the left.

Open Wire, copy and paste as a new layer. Place across the small strip on the right hand side. Apply a drop shadow. Erase any of the wire showing on the left hand side past the tube.

Open Skulls, resize by 60 percent. Copy and paste as a new layer. Place at the top of the template in front of the record and tube. Apply a drop shadow.

Open Can, resize by 40 percent. Copy and paste as a new layer, place on the left hand side of the skulls, apply a drop shadow.

Open Pills, resize by 60 percent, copy and paste as a new layer. Place in front of the can. Apply a drop shadow.

Open Warning Label, resize by 60 percent, rotate left 8 degrees. Copy and paste as a new layer. Place on the left hand side next to the can, move this layer below the pills. Apply a drop shadow.

Open Cigarette, resize by 50 percent, rotate right. Copy and paste as a new layer, place in front of the pills and label. Apply a drop shadow.

Copy and paste the mask included in my supplies as a new layer above the white background. Position to your liking.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you had fun and I look forward to you coming back again. I would love to see what you created.

Supplies Needed:
Tube of choice, I am using Elias Chatzoudis found at PTE
Scrap kit Aphrodisiac by Inzpired Creationz found at the Creative Chicks blog
MuRa’s Meister - Copies
MuRa’s Meister - Perspective Tiling

Open a new image 600 x 250 with a white background.

Add a new layer above the white background, flood fill this layer with a gradient made from two colors of the tube.

Copy and paste the tube as a new layer above the gradient layer. Position close to the center to your liking. Go to Effects - MuRa’s Meister - Copies
Wallpaper - Rotate
Random
Wraparound
Blend Mode
Number - 8
I left the other setting on default, you of course can play around with these until you have something you like.

Still on the tube layer go to Effects - Distortion Effects - Twirl and I used 200. You can use the setting you like. Change the Blend Mode on the tube layer to Overlay.

Open Word Art (don’t close), resize by 95 percent and then again by 98 percent. Copy and paste as a new layer. Place at the bottom of the template. Go to Effects - MuRa’s Perspective Titling.
Perspective - 5
Stretch - 4
And the rest of the setting I Left on default. Once again you can play around with this until you have something you like.  Change the Blend Mode on the tiling to Luminance (L).

Using the Selection tool, draw out a strip across the template on top of the other layers. Add a new layer above the rest and flood fill this with the gradient, switch the colors. Go to Effects - Edge Effects - Enhance. Apply a drop shadow. Position the strip to your liking.

Copy and paste the word art again, this time place inside the strip. Duplicate and change the top layer to Multiply.  Merge the two. Apply a drop shadow.

Copy and paste the tube as a new layer. Place to your liking. Apply a drop shadow.

Select the white background layer, go to Selections - Modify - Select Selection Borders and I used 4. Add a new layer above the others, flood fill this layer with the gradient. Go to Effects - Edge Effects - Enhance. Apply a drop shadow.

Add any copyrights and your name. Save as a PNG.

*NOTE to make the avatar open image 150 x 150, follow the same thing as above in a smaller size.

Thank you for using one of my tuts, I hope you have enjoyed yourself and I look forward to having you back here again!! I would love to see what you have created.

Supplies Needed:
Tube of choice (close-up and full/half), I am using Elias Chatzoudis found at PTE
Scrap kit Aphrodisiac by Inzpired Creationz found on the Creative Chicks blog
Template 177 by Denz Designz
Mask of choice
Penta.com - Dot and Cross

Open the template, duplicate and close the original. Delete the copyright and resize all layers by 110 percent. Resize the canvas by 700 x 700 and flood fill the background with white.

Select Black Square 1, go to Selections - Select All - Float - Defloat.

Open a paper of choice, copy and paste as a new layer above the selected layer. Position to your liking. Go to Selections - Invert and hit delete on the keyboard. Delete the template layer.

Repeat the above steps for the remaining template layers.

Select the large circle on the left hand side, copy and paste the close-up as a new layer. Position on top of the circle to your liking, apply a drop shadow. Select the circle again, go to Selections - Select All - Float - Defloat. Select the tube and go to Selections - Invert and hit delete on the keyboard. Lower Opacity to 90. Repeat this again for the circle on the right hand side.

Select the smaller circle on the left hand side, go to Selections - Select All - Float - Defloat.

Copy and paste the tube as a new layer above the selected layer. Position to your liking, go to Selections - Invert and hit delete on the keyboard. Duplicate the tube, on the top tube change the Blend Mode to Multiply and the bottom tube to Screen. Repeat this for the smaller circle on the right hand side but this time change the top tube to Color (L).

Open Heart 3, resize by 50 percent. Copy and paste as a new layer, place at the bottom of the small circle on the left hand side. Apply a drop shadow.

Open Star 2, duplicate, resize one by 25 percent and the other by 15 percent. Copy and paste the larger star as a new layer. Place in the upper right hand corner, apply a drop shadow. Copy and paste the smaller star as a new layer. Place in the lower left hand corner. Apply a drop shadow. Duplicate and place next to the larger star on the right hand side.

Open Cupcake 2, resize by 25 percent. Copy and paste as a new layer. Place in the lower left hand corner. Apply a drop shadow.

Open Cupcake 3, resize by 25 percent. Copy and paste as a new layer. Place in the lower right hand corner. Apply a drop shadow.

Open Ribbon 2, resize by 60 percent. Copy and paste as a new layer. Move this layer so that the ribbon is between the two squares in the middle of the template. Place so its on the lower left hand side. Apply a drop shadow. Duplicate and place at the top of the right hand side. See my tag if needed.

Open Word Art, resize by 80 percent. Copy and paste as a new layer, place at the bottom of the template. Apply a drop shadow. Duplicate and change the Blend Mode on the top one to Multiply. Merge the two.

Copy and paste the tube as a new layer, place behind the word art. Apply a drop shadow.

Add a new layer above the white background. Flood fill with a gradient made from two colors from the tube. Apply the mask to this layer, delete the mask layer and merge group.

Add any copyrights and your name. Crop, Resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you had fun and I look forward to having you back here again!! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using Jose Cano found at PTE
Scrap kit Girls Gone Wild by Inzpired Creationz found at the Creative Chicks blog
Template ASB TT1 by A Space Between

VERY quick and simple! You’ll be back on Facebook in no time!

Open the template, duplicate and close the original. Delete the copyright and resize all layers by 80 percent. Resize canvas by 700 x 700. Flood fill the background with white.

Select Left Big circle, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. Position to your liking, resize if needed. Go to Selections - Invert and hit delete on the keyboard.

Repeat the above steps for the remaining template layers.

Copy and paste the tube as a new layer inside the frame. Resize and position to your liking, erase any of the tube that’s out past the frame that you don’t like. Apply a drop shadow.

Open Halftone 1, copy and paste as a new layer above the white background. Place to your liking, this is going to be our mask layer. Apply a drop shadow.

Open Sign 1 and Sign 2, resize both by 40 percent. Copy and paste the red one as a new layer. Place in the middle of the small circle at the bottom left hand side. Apply a drop shadow. Copy and paste the green one as a new layer. Place in the center of the small circle on the right hand side, apply a drop shadow.

Open Star 1 and resize by 25 percent, open Star 2 and resize by 20 percent. Copy and paste both stars as new layers. Place to your liking. Apply a drop shadow to all layers. Duplicate as many as you like.

Open Cuffs 1, resize by 50 percent, flip. Copy and paste as a new layer. Placing to your liking. Apply a drop shadow.

Open Skins, resize by 30 percent. Copy and paste as a new layer. Place to your liking. Add a drop shadow.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tutorials, I hope you have enjoyed yourself and I look forward to you coming back for more!! I would love to see what you have created.

Supplies Needed:
Tube of choice (close-up and full body), I am using one by Keith Garvey, you can find him at PTE
Scrap kit Parental Advisory by Seven found here
Template 91 by Pooker found here
Mask of choice

Open the template, duplicate and close the original. Resize all layers by 80 percent. Delete the copyright and resize canvas by 700 x 700. Flood fill the background layer with white.

Select the Lt Grey Circle 2 layer, go to Selections - Select All -  Float - Defloat.

Copy and paste a paper of choice above the selected layer, position to your liking. Go to Selections - Invert and hit delete on the keyboard. Delete the template layer and apply a drop shadow.

Repeat this for the remaining template layers.

Copy and paste the close-up tube as a new layer below the frame layer. Position in the lower left hand corner. Erase any of the tube that’s out past the frame. Duplicate and place in the right hand corner. Erase any of the tube that’s out past the frame. I messed around with the Blend Mode until I found something I liked, you can do the same.

Open Element 027, copy and paste as a new layer, place just the two tube layers. Apply a drop shadow.

Copy and paste the tube as a new layer, position to your liking, resize if needed. Apply a drop shadow.

Open Element 021, resize by 40 percent. Copy and paste in the upper right hand corner on top of the frame. Apply a drop shadow. Duplicate and mirror. Place in the lower left hand corner on top of the frame.

Open Element 008, resize by 40 percent. Copy and paste as a new layer. Place on the top left hand corner of the frame. Erase part of the collar giving it a hanging look.

Open Element 070, resize by 60 percent. Copy and paste as a new layer, place in the strip on the top left hand side. Apply a drop shadow. Duplicate and place in the lower right hand corner. Duplicate and place in the center on top of the frame on the left hand side. Duplicate once more and place on top of the frame on the right hand side.

Open Element 012, resize by 60 percent. Copy and paste as a new layer placing at the bottom behind the tube. Apply a drop shadow.

Open Element 003, resize by 30 percent, copy and paste as a new layer. Place in front of the tube on the left hand side. Apply a drop shadow.

Open Element 002, resize by 15 percent, copy and paste as a new layer. Place in the top left hand corner just inside the dotted line, apply a drop shadow. Duplicate and place inside the dotted line in the lower right hand corner.

Open Element 111, resize by 60 percent, copy and paste as a new layer above the white background. Place at the top to your liking, duplicate as many as you like. Apply a drop shadow.

Copy and paste a paper above the white background, apply the mask to this layer. Delete the mask and merge group. Resize if needed.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you have enjoyed yourself. I look forward to having you back here again!! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using Arthur Crowe, this tube is from PTE he can also be found here
Template 129 by Leah
Scrap kit Punked out in Pink by MizTeeques Scraps found at The Creative Chicks blog
My supplies (mask, gloves and trophies) here
Eyecandy 4000 - Gradient Glow (optional)

Open the template, resize all layers by 90 percent. Delete the copyright and flood fill bottom layer with white.

Select layer 9, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. Position to your liking. Go to Selections - Invert and hit delete on the keyboard. Delete the template layer and apply a gradient glow or drop shadow.

Repeat the above steps for the remaining template layers.

Copy and paste the mask layer included in my supplies as a new layer, move above the white background layer.

Open Element 31, resize by 60 percent. Copy and paste as a new layer. Place below the word art at the bottom of the template. Apply a drop shadow.

Open Element 20, resize by 12 percent. Go to Image - Free Rotate and rotate right 45 degrees, mirror and flip. Copy and paste as a new layer. Place below the word “meaning”. apply a drop shadow.

Open Element 22, resize by 60 percent, copy and paste as a new layer, place overlapping the rectangles on the left hand side. Apply a drop shadow. Duplicate and mirror. Place a little higher.

Copy and paste the tube as a new layer. Resize if needed. Move this layer so that its below the long thin line at the bottom of the template. Apply a drop shadow.

Copy and paste the pink trophy as a new layer. Place on the left hand side.

Copy and paste the gloves, place in front of the trophy on the left hand side.

Copy and paste the grey trophy as a new layer, place on the right hand side.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close the background layer first).

Thank you for trying one of my tuts, I sure hope you had fun and I look forward to you coming back again! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using Ismael Rac found here
Template 40 Creative Chicks by Roseblack
Scrap kit 02 by Heartfelt Scraps
My supplies (mask) here

Wow!! This weekend the Chicks kicked my butt with the PJ Party….but it was FUN! If you haven’t checked them out do so NOW! LOL…. This was one of the template challenges I made for the party….and its EASY!!!

Open the template. Duplicate and close the original. Delete the copyright.

Select Raster layer 2,  go to Selections - Select All - Float - Defloat.

Open a paper of choice, resize as needed. Copy and paste as a new layer above the selected layer. Position to your liking. Go to Selections - Invert and hit delete on the keyboard. Apply a drop shadow. Delete the template layer.

Repeat the above steps for the remaining template layers.

Copy and paste the tube on top of the middle circle. Resize if needed. Apply a drop shadow. Erase any of the tube that you don’t want out past the circle layer.

Select the mask layer, go to Selections - Select All - Float - Defloat.

Add a new layer above the selected layer. Make a gradient from two colors of your liking. Flood fill this layer. Change the Blend Mode to Color (L). Duplicate if desired. Merge both layers.

Copy and paste the mask layer above the white background layer. Resize if needed.

Add  any copyrights and your name. Crop, resize if desired. Save as a PNG (close background layer first).

SEE, told ya it was easy!!!!

Thank you for trying one of my tuts, I hope you have fun and plan on coming back for another visit! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using Arthur Crowe found here
Scrap kit Skullz N Stripes by Tasha’s Playground, you can purchase this kit from PFD and SATC
Template Scarlet & Rosey Collab Temp 3 from Creative Misfits
Mask of choice

AWESOME kit Tasha!!

Open the template, duplicate and close the original. Delete the copyright and the stars. Resize all layers by 90 percent. Resize canvas by 700 x 700. Flood fill the bottom layer with white.

Select shape 2 copy 2, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. Position to your liking,, go to Selections - Invert and hit delete on the keyboard. Apply a drop shadow or Gradient Glow. Delete the template layer.

Repeat the above steps for the remaining template layers.

For the word Attitude I selected a color from the tube, picked Color Changer and flood fill the layer. You can also use a paper or gradient.

Open Cityscape and copy and paste as a new layer above the circle and diamond layers, place at the top in the center. Apply a drop shadow. Duplicate, flip. Low Opacity to 57.

Open Dot Scatter, copy and paste as a new layer above the white background layer. Place in the upper left hand corner. Apply a drop shadow. Duplicate and place in the lower right hand corner.

Open Flair 1, resize by 30 percent. Copy and paste as a new layer. Place on the left hand side overlapping the rectangle and circle. Apply a drop shadow. Duplicate, mirror and place on the right hand side.

Open Evil Bear, resize by 50 percent. Copy and paste as a new layer, place on the left hand side behind the word art and rectangle. Apply a drop shadow. Duplicate and mirror.

Copy and paste the tube as a new layer. Place in the center of the template between the two bears. Resize if needed. Apply a drop shadow.

Open Bomb, resize by 60 percent. Copy and paste as a new layer in front of the tube. Apply a drop shadow. Duplicate and mirror. Place on the left hand side.

Open Bullet, resize by 50 percent. Copy and paste as a new layer. Place beside the bomb on the right. Apply a drop shadow. Duplicate and place in front of the bomb on the left hand side.

Open Drink 2, resize by 40 percent. Copy and paste as a new layer. Place behind the bullet on the left hand side. Apply a drop shadow.

Open Sparkle 2, copy and paste as a new layer. Place on top of the city.

Add a new layer about the white template layer, make a gradient out of two colors from the tube. Flood fill the layer with the gradient. Apply the mask to this layer, delete the mask layer and merge group.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close white background first).

Thank you for trying one of my tuts, I hope you have enjoyed using it look forward to you coming back again! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using The Hunter now found here
Scrap kit Love to Love by Tasha’s Playground, you can purchase this kit at PFD and SATC
Template 101 by Creative By Nature, found here
Mask of choice
Eye Candy 4000 - Gradient Glow (optional)

Open the template, duplicate and close the original. Delete the copyright. Resize all layers by 85 percent. Resize the canvas by 700 x 700. Flood fill the background layer with white.

Select layer 11, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. Resize if desired. Position to your liking. Go to Selections - Invert and hit delete on the keyboard. Delete the template layer.

Repeat the above steps for the remaining template layers.

Select one of the small squares on the end, go to Selections - Select All - Float - Defloat.

Copy and paste the tube as a new layer. Mirror it depending one which side you selected. Position inside the square to your liking. Go to Selections - Invert and hit delete on the keyboard. Apply a drop shadow. Repeat this for the square on the opposite side. I changed the Blend Mode on one tube to Multiply and the other to Screen.

Apply a drop shadow or Gradient Glow to all template layers.

Open Stars Scatter, resize by 90 percent. Copy and paste as a new layer. Place to the left hand side above the white background layer. Apply s drop shadow. Duplicate, mirror and flip. Reposition if needed on the right.

Open Flowers, copy and paste as a new layer above the stars we just added, place to your liking, apply a drop shadow.

Open Heart Flowers, copy and paste as a new layer. Place in the center of the two circles. Apply a drop shadow.

Open Flowers 3, resize by 50 percent. Copy and paste as a new layer. Place on top of the heart flowers we just added. Apply a drop shadow. Duplicate and mirror move to the opposite side.

Open Flower 1, resize by 40 percent. Copy and paste as a new layer, place at the top right hand side, overlapping the circles. Apply a drop shadow. Duplicate, place in the bottom left corner in the same manner.

Open Flower 2, resize by 35 percent, copy and paste as a new layer. Place overlapping the red flower we just added. Apply a drop shadow. Duplicate and do the same of the opposite side.

Open Flower 4, resize by 30 percent. Copy and paste as a new layer. Place overlapping the two flowers we just added in the top right hand corner. Apply a drop shadow. Duplicate and do the same for the left hand side.

Open Hearts, resize by 35 percent. Copy and paste as a new layer. Place below the word art at the bottom right. Apply a drop shadow. Duplicate and mirror. Reposition if needed. Duplicate once more and place at the top left overlapping the circle with the word art.

Copy and paste the tube as a new layer. Move this layer below the word art. Position to your liking, resize if needed. Apply a drop shadow.

Add a new layer above the white background layer. Make a gradient out of two colors from the tag, flood fill this layer with the gradient. Apply the mask to this layer, resize if needed. Delete the mask layer and merge group.

Resize all layers again by 90 percent.

Add any copyrights and your name. save as a PNG (close background layer first).

Thank you for trying one of my tuts, I sure hope you enjoyed yourself enough to come back and try another one! I would love to see what you have created.

Supplies Needed:
Tube of choice (full and close-up), I am using Very Many found at SATC
Scrap kit Party In The City by Tasha’s Playground, you can purchase this at SATC
Template 403 by Divine Intentionz
Mask of choice
Eye Candy 4000 - Gradient Glow (optional)

Open the template, duplicate and close the original. Delete the copyright and the stars. Resize canvas by 700 x 700. Flood fill the background layer with white.

Select the layer copy of circle 3, go to Selections - Select All - Float - Defloat.

Select a paper of choice and paste as a new layer above the selected layer. Position to your liking, go to Selections - Invert and hit delete on the keyboard. Delete the template layer.

Repeat the above steps for the remaining template layers.

Select the frame background on the left, copy and paste the close-up as a new layer. Place inside the frame. Position to your liking, resize if needed. Apply a drop shadow. Select the frame background again, go to Selections - Select All - Float - Defloat. Back to the tube, go to Selections - Invert and hit delete on the keyboard. Duplicate the tube, select the bottom one and set the Blend Mode to Screen. Set the top tube Blend Mode to Multiply.

Select the circle on the right hand side, go to Selections - Select All - Float - Defloat.

This time mirror the close-up tube, copy and paste as a new layer above the selected layer. Position to your liking, resize if needed. Go to Selections - Invert and hit delete on the keyboard. Change the Blend Mode to Multiply.

Apply a gradient glow to all the template layers. If you prefer you can use just a drop shadow.

Open Stars, copy and paste as a new layer above the white background layer. Place at the bottom of the template. Apply a drop shadow, duplicate and flip. Place at the top of the template.

Open Cityscape, copy and paste as a new layer above the top square and circle. Apply a drop shadow. See my tag for placement if needed.

Open Balloon 3, resize by 25 percent. Copy and paste as a new layer. Place above the cityscape. Apply a drop shadow. Duplicate as many as you wish placing them to your liking.

Open Party Skull, resize by 50 percent. Copy and paste as a new layer. Place overlapping the left hand corner of the frame. Apply a drop shadow. Duplicate and place in the bottom right corner of the circle with the tube.

Open Star, resize by 40 percent. Copy and paste as a new layer. Place below the skull on the left hand side. Apply a drop shadow. Duplicate, mirror, place at the top of the circle on the right hand side. Duplicate once more and place overlapping the circle and frame at the top of the template.

Open Sparkles 2, copy and paste as a new layer. Place at the bottom of the template to your liking, duplicate and place at the top to your liking.

Open Lips, resize by 30 percent. Copy and paste as a new layer. Place at the bottom overlapping the frame. Apply a drop shadow. Duplicate and mirror, place on the right hand side of the circle.

Open Word Art, copy and paste as a new layer. Place in the center of the template. Position to your liking, apply a gradient glow or nice drop shadow.

Copy and paste the full body tube as a new layer, place in the center of the tag, resize if needed. Apply a drop shadow.

Add a new layer above the white background layer, using two colors from the tag make a gradient of your liking, flood fill this layer with the gradient. Delete the mask layer and merge group.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG (close white background layer first).

Thank you for trying one of my tutorials, I hope you had fun and hope to see ya back here again. I would love to see what you have created.

Supplies Needed:
Tube of choice ( full or half body and close-up), I am using Jose Cano found at PTE
Scrap kit Rock the Attitude by A Space Between
Template 204 by Denz Designz
Mask of choice
Eye Candy 4000 - Gradient Glow (optional)

Open the template, duplicate and close the original. Delete the copyright and resize the canvas by 700 x 700. Flood fill the background layer with white.

Select the black oval shape layer, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. I resized the paper by 60 percent. Position to your liking. Go to Selections - Invert and hit delete on the keyboard. Delete the template layer.

Repeat the above steps for the remaining template layers.

Select the half circle layer on the right. Copy and paste the close-up tube above this layer. Apply a drop shadow. Position to your liking. Select the half circle layer, go to Selections - Select All - Float - Defloat. Select the tube layer again, go to Selections - Invert and hit delete on the keyboard. Change the Opacity to 85.

Select the angled rectangle layer on the left. Copy and paste the close-up tube above this layer. Apply a drop shadow. Position to your liking. Select the angled rectangle layer, go to Selections - Select All - Float - Defloat. Select the tube layer again, go to Selections - Invert and hit delete on the keyboard. Change the Blend Mode to Multiply. Change the Opacity to 80.

Apply either a drop shadow or Gradient glow to all the layers.

Open Element 69, resize by 30 percent. Copy and paste as a new layer. Place inside the small circle at the top of the template. Apply a drop shadow. Duplicate and place inside the small circle at the bottom right.

Open Element 11, copy and paste as a new layer, place at the top of the template above the other layers. Apply a drop shadow.

Open Element 48, resize by 30 percent, go to Image Free Rotate and rotate left 25 degrees. Copy and paste as a new layer. Place above the thin rectangle on the left hand side. Apply a drop shadow.

Open Element 1, resize by 60 percent, go to Image Free Rotate and rotate right 25 degrees. Copy and paste as a new layer. Place above the thin rectangle next to the skull we just added. Apply a drop shadow.

Open Element 23, resize by 30 percent, mirror. Copy and paste as a new layer. Place at the bottom left hand corner below the template layers. Apply a drop shadow.

Open Element 26, resize by 30 percent. Copy and paste as a new layer. Place on the right hand side below the tube. Apply a drop shadow.

Copy and paste the full or half body tube as a new layer. Resize if needed. Place about in the center of the template. Apply a drop shadow.

Open Element 70, resize by 80 percent. Copy and paste as a new layer. Place at the bottom of the template in front of the tube. Apply a drop shadow.

Open Element 40, copy and paste as a new layer. Place at the bottom of the template behind the tube and word art. Apply a drop shadow.

Open Element 50, resize by 50 percent. Copy and paste as a new layer. Place on top of the white ribbon. Apply a drop shadow.

Add a new layer above the white background layer, make a gradient using two colors from the tag or the tube. Flood fill this layer with the gradient. Apply the mask to this layer. Delete the mask layer and merge group. Resize mask if needed.

Add the words ROCK THE inside the small rectangle on the left. Apply a drop shadow.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG (close the background layer first).

I hope you had fun doing one of my tutorials and look forward to seeing ya back here again. I would love to see what you have created.