Supplies Needed:
Tube of choice (full and close-up), I am using one of Elias Chatzoudis, you can find his store here
Scrap kit Irish Bitch by Killer Kitty
My supplies (mask and word art) here
Template Misfit 4 by Deb here
Xero - Soft Mood and Soft Vignette

OMG, I will be SO happy when this is typed up and posted! This was the tut I was in the middle of when my computer decided to crash and cause me to lose everything….piece of junk! LOL

Anyway open the template, duplicate and close the original. Delete the copyright and the word art (Irish Girl). Resize all layers by 110 percent. Flood fill Raster 1 with white.

I didn’t change a whole lot on the template. It seemed to match my tube pretty good so I left most of the backgrounds like they were, this is up to you depending on what tube you are using.

Select the large black oval with the dots on the left hand side, copy and paste the tube as a new layer. Apply MuRa’s Meister - Copies - Wallpaper (rotate):
Number - 15
Shift x - 50
Shift Y - 50
And I left the rest of the settings on default. Lower the Opacity to 50. Select the black oval again, go to Selections - Select All - Float - Defloat. Select the wallpapered tube, go to Selections - Invert and hit delete on the keyboard.

Copy and paste the word art included in my supplies, place next to the dots inside the circle on top of the wallpapered tube.

Copy and paste the mask included in my supplies, copy and paste as a new layer above the white background. Position to your liking. I lowered Opacity to around 60.

Select the square on the left hand side, Change the color on the bottom square to black, I just used the color changer to do this. Select the next layer up, go to Selections - Select All - Float - Defloat. Copy and paste a paper of choice above the selected layer. Position to your liking, go to Selections - Invert and hit delete on the keyboard (keep selected). Copy and paste the close-up tube as a new layer inside the frame. Position to your liking, hit delete on the keyboard. Apply both Xero - Soft Mood and Soft Vignette to the tube, play around with until you find something you like.

Copy and paste the full body tube as a new layer. Place to your liking, Move below the word art. Apply a drop shadow.

Open Star Spiral, copy and paste as a new layer above the mask layer. Place to your liking on the left hand side. Apply a drop shadow. Duplicate, flip and mirror.

Open Ribbon 03 and Ribbon 02, resize both ny 50 percent. Copy and paste ribbon 03 as a new layer. Place in the lower left hand corner behind the frame and tube. Apply a drop shadow. Duplicate and place on the right hand side behind the oval, move to the edge of the oval. Copy and paste ribbon 02, place at the top of the template behind the oval. Apply a drop shadow. Duplicate and move down to the bottom.

Open Star Gem 01 and Star Gem 02, resize both by 20 percent. Copy and paste as a new layer, place both to your liking around the tag. Duplicate as many as you like.

Select the clover on the left hand side, I changed the color and apply a nice drop shadow or gradient glow. Repeat this for the clover on the right hand side.

Add a gradient glow to the word art, and then add the words Irish Bitch between the clovers. You can always add something else. Apply a gradient glow or drop shadow.

Add any copyrights and your name. Crop, resize if desired. Save as a PNG (close background first).

Thank you for trying one of my tuts, I hope you had fun and I look forward to having you back here again. I would love to see what you have created.

Supplies Needed:
Tubes of choice (close-up and full), I am using Arthur Crowe found here
Scrap kit Irish Fun by Laurie Made Me Scraps
Template Irish Girls Template 2 by 2 Irish Bitches
Mask of choice

Happy St. Patrick’s Day! This is the last tutorial for paddy’s day this year, hope you all like it!

Open the template, duplicate and close the original. Delete the word art. Resize all layers by 90 percent, and resize canvas by 700 x 700. Flood fill the untitled layer with white.

Select the circle layer, go to Selections - Select All - Float - Defloat.

Open a paper of choice, resize by 80 percent, copy and paste as a new layer above the selected layer. Position to your liking, go to Selections - Invert and hit delete on the keyboard. Delete the template layer and apply a drop shadow.

Repeat the above steps for the remaining template layers.

Select the rectangle in the center, go to Selections - Select All - Float - Defloat.

Copy and paste the close-up tube as a new layer above the selected layer. Resize and position to your liking, apply a drop shadow. Go to Selections - Invert and hit delete on the keyboard. Change the Blend Mode to Luminance (legacy).

Select the small circle on the left, go to Selections - Select All - Float - Defloat.

Copy and paste the close-up above the selected layer, resize and position to your liking. Apply a drop shadow, go to Selections - Invert and hit delete on the keyboard. Change the Blend Mode to Multiply. Repeat for the small circle on the right.

Select the large rectangle at the bottom of the template. Type out the words Go GREEN. Apply a drop shadow and drop the Opacity to 65.

Open Element 15, copy and paste as a new layer, place in the top upper left corner. Apply a drop shadow. Duplicate and mirror, place in the lower right hand corner.

Open Element 39, duplicate and resize one by 60 percent. Copy and paste the larger one as a new layer. Place on the left hand side inside the clover you replaced with a paper. Apply a drop shadow. Duplicate and mirror and position on the right hand side. Copy and paste the smaller one as a new layer, place in the upper right hand corner. Apply a drop shadow, duplicate and mirror. Place on the left hand side.

Open Element 38, copy and paste as a new layer. Place overlapping the large clover on the left hand side. Apply a drop shadow. Duplicate and place in the upper right hand corner.

Copy and paste the full tube as a new layer. Place in the center of the template. Resize if needed. Apply a drop shadow.

Add a new layer above the white background layer. Flood fill with a gradient from the tag. Apply the mask to this layer, delete the mask layer and merge group. Resize if needed.

I typed out the words GREEN… in the upper left corner and the words IS SEXY in the lower right hand corner. Then applied a drop shadow.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG (close background layer first).

Thank you for trying one of my tutorials, I hope you have enjoyed it enough to come back for another! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using Elias Chatzoudis found at PTE
Scrap kit Irish Anette by Wicked Princess
Template St. Patrick’s Day by Jenny found at Creative Misfits

This is a very quick and simple tag to make, you can make an avatar to go with it and use as a forum set if you like. Okay, onto the tut!

Open the template, duplicate and close the original. Delete the copyright.

Select the white layer, this is the frame, go to Selections - Select All - Float - Defloat.. Copy and paste a paper above this layer. I resized the paper by 60 percent. Position to your liking then go to Selections - Invert and hit delete on the keyboard. Apply a drop shadow.

Repeat this for the remaining template layers.

Open Clover Sparkle, copy and paste as a new layer. Place to your liking and apply a drop shadow.

Open Pot of Gold, resize by 60 percent. Copy and paste as a new layer. Position in the lower left hand corner. Erase any of the pot that’s out past the frame. Apply a drop shadow.

Open Rainbow, resize about 75 percent. Copy and paste as a new layer. Place behind the pot. Delete any of the rainbow that’s out past the frame.

Copy and paste the tube as a new layer, resize if needed, place on the right hand side. Apply a drop shadow.

Add any copyrights and your name.

Crop, and save as a PNG.

Thank you for trying one of my tuts, see that was FAST!! I hope you had fun and look forward to having you come back again. I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using one by Barbara Jensen found here
Scrap kit Irish Luck by Creative Scraps
Template 58 by Rose
Mask of choice
Eye Candy 4000 - HSB Noise (optional)

Open the template, duplicate and close the original. Delete the copyright, resize the canvas by 700 x 700. Flood fill the Raster 1 with white.

Select Raster 10, depending on what tube you’re using you may want to change the colors, I only changed the color on the large circle. Go to Effects - Plugins - Eye Candy 4000 and use HSB Noise, here is the setting I used:
Hue Variation - 13
Saturations Variation - 14
Brightness Variation - 17
Opacity - 0
Pattern - Smooth
The rest of default settings.
Apply a drop shadow.

Select the small circle, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. I used the paper by 50 percent. Position to your liking, once happy go to Selections - Invert and hit delete on your keyboard.

I keep the rest of the template how it was and only apply drop shadows to all layers.

Copy and paste the tube as a new layer. Position to your liking inside the circle. Erase any of the tube out past the bottom of the circle. Apply a drop shadow.

Open Element 10, select a clover or two with the Freehand tool. Copy and paste as a new layer. Place to your liking, duplicate or select some more until your happy. I added mine to the top of the tag. Apply a drop shadow to all layers.

Open Element 16, resize by 30 percent, copy and paste as a new layer. Place on the right hand side on top of the strip. Apply a drop shadow. Duplicate and flip. Repeat for the left hand side.

Open Element 5, resize by 30 percent. Copy and paste as a new layer. Place in the center of the strip on top of the clovers. Apply a drop shadow. Duplicate and repeat with the other side.

Open Element 20, resize by 80 percent, go to Image - Free Rotate and rotate right 45 degrees. Copy and paste as a new layer at the bottom of the tag. Apply a drop shadow. Duplicate, flip and mirror. Place at the top of the tag behind the circle layers.

Open a paper of choice and paste as a new layer above the white background layer, apply the mask to this layer. Delete the mask layer and merge group.

Resize all layers by 90 percent.

Add any copyrights and your name.

Crop, save as a PNG (close background layer first).

Thank you so much for trying one of my tuts, I hope to see ya back here for more!! I would love to see what you have created!!!!

Supplies Needed:
Tube of choice (two different sizes), I am using the talented Keith Garvey, you can find him at PTE
Scrap kit Lucky in Love by Creative Scraps by Crys
Template STPAT #10 by Mincrisar found at Creative Misfits
Xero - Radiance (optional)
Mask of choice

Open the template, duplicate and close the original. Delete the copyright, clover and word art.

Select the rectangle layer, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer, I resized the papers by 80 percent. Once happy with the position go to Selections - Invert and hit delete on the keyboard. Apply a drop shadow and delete the template layer.

Repeat the above steps of the remaining template layers.

Copy and paste the close-up or biggest tube as a new layer above the rectangle background. Apply a drop shadow. Position inside the rectangle.

Select the rectangle background, go to Selections - Select All - Float - Defloat.

Select the close-up tube once more, go to Invert and hit delete on your keyboard. I applied the following effects to the close-up:
Effects - Texture Effects - Blinds:
Width - 2
Opacity - 30
Color - White
Horizontal & Light From Left/Top - Checked

Effects - Plugins - Xero - Radiance:
Strangeness - 128
Charm - 50
Truth - 128
Beauty - 255

And I changed the Blend Mode to Multiply.

Copy and paste the smaller tube as a new layer above the square background. Apply a drop shadow. Place inside the square.

Select the Square background, go to Selections - Select All - Float - Defloat.

Select the tube again, go to Selections - Invert and hit delete on the keyboard. I changed the Blend Mode to Soft Light.

Alrighty, now onto the elements!

Open 4 Leaf Clover, resize by 40 percent, copy and paste as a new layer. Place in the upper left hand corner of the square. Apply a drop shadow. Duplicate and place in the lower left hand corner of the rectangle.

Open Bow 2, resize by 25 percent. Copy and paste as a new layer. Place in the center of the clover on the left hand side. Apply a drop shadow. Duplicate and place in the center of the clover on the right.

Open Ribbon 3, resize by 25 percent, copy and paste as a new layer. Place under the bow on the left hand side, apply a drop shadow.

Open Beads, resize by 50 percent, mirror. Copy and paste as a new layer. Place near the bottom of the square. Apply a drop shadow. Duplicate and place on the left hand side of the rectangle. I then selected a few beads and placed them here and there using the Freehand tool.

Copy and paste the tube as a new layer. Position in the center of the template. Resize if needed. I resized the one I used by 90 percent. Apply a drop shadow.

Open Rainbow, resize by 80 percent. Copy and paste as a new layer, move this layer below the frames. Place at the top of the tag. Apply a drop shadow.

Open Clovers, copy and paste as a new layer below the rainbow. Position to your liking, apply a drop shadow. Duplicate and mirror.

Add a new layer above the white background, choose two colors from the tag and make a gradient. Flood fill the layer with the gradient. Apply the mask to this layer. Delete the mask layer and merge group.

Finally I added Happy Saint Patrick’s Day at the bottom of my tag.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG (close white background first).

Thank you for trying one of my tuts, I hope you have enjoyed using it enough to come back for more! I would love to see what you have created.

Supplies Needed:
Tube of choice, (close-up and full), I am using one of Ismael Rac found here
Scrap kit Lucky by Tasha’s Playground, can be found at Creative Misfits
Template 142 by Kristin at Toxic Desirez
Mask of choice

Open template, duplicate and close the original. Delete the copyright, resize canvas by 700 x 700. Flood fill the background layer with white.

I keep the template exactly like it is, you can use the papers of course if you would like. I thought the colors matched perfect with the tube so I left it how it was.

Select the Doodle 1 layer, duplicate and mirror.

Apply drop shadows to the doodles, and the glitter layers. I also apply drop shadows to the clovers and word art.

Select the circle layer, copy and paste the close-up tube above this layer. Position to your liking, resize if needed. Apply a drop shadow. I added the Blinds Effect using these settings:
Width - 2
Opacity - 30
Color - White
Horizontal  & Light from Left/Top - Checked
Then I changed the Blend Mode to Multiply.

I also removed some of the word art inside the circle so they aren’t seen on the tube. I selected the tube, go to Selections - Select All - Float - Defloat. Now select the word art and hit delete on your keyboard.

I added the Blind Effect to the circle layer using the same settings as above.

Select one of the Clovers from the template, paste as a new layer. Resize by 80 percent and mirror. Place above the clover on the left hand side.

Open Scatter, copy and paste as a new layer. Place near the bottom of the circle. Apply a drop shadow. I then used the Freehand tool and selected a few clover and placed them around my tag.

Open Pot, resize by 60 percent. Copy and paste as a new layer. Place in the bottom right hand corner of the tag. Apply a drop shadow.

Open Lips, duplicate, resize one by 60 percent and the other by 20 percent. Copy and paste the larger one as a new layer. Go to Image - Free Rotate and rotate right 15 degrees. Place on the left hand side. Apply a drop shadow. Duplicate, mirror and place at the top right hand side. Copy and paste the smaller lips. I placed some inside the pot and around the bottom of the tag. Apply a drop shadow.

Copy and paste the full tube as a new layer. Place to your liking, apply a drop shadow. Resize if needed.

Add any copyrights and your name.

Crop, resize if needed. Save as a PNG (close the white background first).

Thank you for trying one of my tutorials. I hope you have enjoyed yourself and will come back for more! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using a FTU tube by 6Aika6, you can download it here
Scrap kit, Happy St. Paddy by Bubble’s Dreams
Template 217 by Divine Intentionz
Word art Lucky by DevineDzines
Mask of choice

Open the template, duplicate and close the original. Delete the copyright and resize all layers 700 by 700. Flood fill the background layer with white.

Select the rectangle layer, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer. Resize paper if you like, I did mine by 65 percent. Position to your liking. Go to Selections - Invert and hit delete on your keyboard. Apply a drop shadow and delete the template layer.

Repeat the above steps for the remaining template layers.

Select the circle, go to Selections - Select All - Float - Defloat.

Copy and paste the tube as a new layer above the circle layer. Resize if needed. Go to Selections - Invert and hit delete on your keyboard. Change the Blend Mode to Luminance (Legacy) and Opacity to around 50.

Open Element 12, copy and paste as a new layer above the white background. Apply a drop shadow. Reposition if needed.

Open Element 21, copy and paste as a new layer. Place on the left hand side somewhere near the top. Apply a drop shadow. Duplicate and move lower on the same side. Duplicate again, mirror and place on the right hand side.

Open Element 18, resize by 80 percent, copy and paste as a new layer. Place above the long thin rectangle at the top of the template. Apply a drop shadow. Duplicate, flip and place at the bottom of the long thin rectangle at the bottom of the template.

Open Element 16, resize by 60 percent, copy and paste as a new layer. Place on the top right hand side of the rectangle at the right. Apply a drop shadow.

Open Element 20, resize by 90 percent. Copy and paste as a new layer. Place on top of the bow so the chain is in the center of the knot. Erase some of the chain so it looks attached, apply a drop shadow.

Duplicate one of the small clovers again and place overlapping the hanging clover.

Open Element 15, resize by 40 percent, copy and paste as a new layer. Place on the left hand side. Apply a drop shadow.

Copy and paste the tube as a new layer. Resize if needed. I resized the one I used by 60 percent. Place about in the center of the tag. Apply a drop shadow.

Open the word art, I resized the one I used by 80 percent, copy and paste as a new layer. Place below the tube. Apply a drop shadow.

Make a gradient out of two colors in the tag, add a layer above the white background layer. Flood fill with the gradient. Apply the mask to this layer, delete the mask layer and merge group. Resize if needed.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

Thank you for trying one of my tuts, I hope you have enjoyed using it enough to come back for more!! I would love to see what you have created!

Supplies Needed:
Tube of choice (two different sizes), I am using Ismael Rac found here
Scrap kit Paddy’s Paddock by Randy’s Sin
Template Irish Charm by Jenny at Creative Misfits
Mask of choice

Open the template, duplicate and close the original. Delete the copyright and the clovers, resize all layers by 90 percent. Resize canvas by 700 x 700. Flood fill the background with white.

Select side bar 1, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice as a new layer above the selected layer. Position to your liking then go to Selections - Invert and hit delete on your keyboard. Apply a drop shadow and delete the template layer.

Repeat the above steps for the remaining template layers.

Open Clovers 2, resize by 75 percent. Copy and paste above the large circle background. Apply a drop shadow.

Select the top circle, copy and paste the close-up tube as a new layer. Position to your liking. Apply a drop shadow. Select the top circle again and go to Selections - Select All - Float - Defloat. Now go back to the tube and hit delete on your keyboard. I changed the Blend Mode to Luminance (Legacy) and apply the blind Effect using these settings:
Width - 2
Opacity - 30
Color - White
Horizontal & Light from the Left/Top - Checked

Open Fairy Dust 1, resize by 40 percent. Copy and paste as a new layer placing inside the top large circle. Duplicate, mirror and flip, reposition if needed.

Open Rainbow 3, resize by 60 percent. Copy and paste as a new layer. Place at the top left of the large circle with the tube. Select the Circle background, go to Selections - Select All - Float - Defloat. Now back to the rainbow, go to Selections - Invert and hit delete on the keyboard. Repeat this for the bottom right hand side, mirror and flip first.

Copy and paste the smaller tube as a new layer. Place to your liking and add a drop shadow.

Open 4 Leaf Clover 1, resize by 12 percent. Copy and paste as a new layer. Place somewhere around the word art Lucky Charm. Apply a drop shadow, duplicate and place on the other side. I also placed a few around my tag. This is up to you where and if you want them.

Open Hat 3, resize by 20 percent, copy and paste as a new layer. Place on the left hand side behind the word art and clover. Apply a drop shadow. Duplicate, mirror.

Open Scatterz 1, resize by 40 percent, copy and paste as a new layer. Place behind the word art at the bottom of the tag, apply a drop shadow.

Open Jewel 2, duplicate, resize one 20 percent and the other by 12 percent, copy and paste the larger one as a new layer. Place at the top left overlapping the circle. Apply a drop shadow. Copy and paste the smaller clover overlapping the larger one.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.
Thank you for trying one of my tuts! I hope you enjoyed it enough to come back and visit again. I would LOVE to see what you have created!!

Supplies Needed:
Tube of choice, I am using one by Ismael Rac found here
Scrap kit Irish Fun by Laurie Made Me Scraps
Template 82 by Scrappy Bit Of Fun
Clover Animation by Scrappy Bit Of Fun

Open the template, duplicate and close the original. Delete the copyright.

Open a paper of choice, copy and paste as a new layer above the background layer, this is going to be the new background.

Open the tube and paste as a new layer, go to Effects - Plugins - MuRa’s Meister - Copies - Wallpaper (Rotate). Here is the setting I used:
Random
Wraparound
Blend Mode
Number - 20
Shift X and Y - 50
The rest are default settings.
You may have to play around with the numbers until you have it where you like it.
Change the Blend Mode to Multiply and Opacity to about 55.

Select Rectangle 1, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice above the selected layer, position to your liking, go to Selections - Invert and hit delete on your keyboard. Apply a drop shadow or gradient glow.

Repeat the above steps for the remaining template layers.

Copy and paste the tube as a new layer, position towards the left hand side. Apply a drop shadow.

Duplicate the long thin rectangle, change the Opacity to 100 on both. Move the copied rectangle above the other layers except for the frame. Place at the bottom of the template.

Find a nice font and type out the words IRISH FUN, apply a drop shadow. Place inside the long rectangle at the top of the tag. Duplicate and place at the bottom inside the rectangle.

Open Element 38 (clover), duplicate, resize one by 80 percent and the other by 60 percent. Go to Image - Free Rotate and rotate 15 degrees left, mirror. Copy and paste the larger clover as a new layer. Place on top of the rectangles on the right hand side. Apply drop shadow. Copy and paste the smaller clover at the bottom of the clover we just added. Apply drop shadow.

Add any copyrights and your name.

Now you can save it without animation or move on to animate your tag.

Open Animation Shop and the clover animation (open this in AS).

Lets do this, in PSP close all layers except for the background and the tube we wallpapered. Copy MERGED, go to Animation Shop and paste as a new animation.

Copy the background for a total of 36 frames. Select the first frame and go to Edit - Select All. Also in Edit make sure Propagate Paste is selected, this will allow us to copy into all frames.

Select all the frames in the clover animation, now drag the first frame of the animation into the first frame of the tag. Check the animation, look good (you can go to View - Animation to see what it looks like so far)? Cool! I placed mine about in the center but you can place it where you like it. Once you have the clovers how you like it head back to PSP.

Alright, now in PSP close off the bottom layers and open the rest of them up, the tube, elements, copyright, your name and so on. Copy MERGED, back to Animation Shop.

Copy and paste as a new animation. Make sure all layers are Selected in your tag, once they are drag the tube and frame layer into the first layer on the tag. Position so the frame in lined up. Have a look at the animation, looks great??? AWESOME!! Now save it as a .gif.

To make the smaller forum tag I used 180 x 225. I then just copied the larger tag to make the smaller one. Animate in the same manner.

PHEW, you are done! Thank you for trying one of my tuts, I hope you have enjoyed using it and will come back for more. I would love to see what you have created!

Supplies Needed:
Tube of choice, I am using one by Bam Bam purchased from MPT, you can now find him at PTE
Scrap kit Your Lucky Charm by Kittz Kreationz
Screws here
Mask of choice
MuRa Meister - Copies (optional)

I don’t think tuts get much easier than this one…lol, this is really simple to make and looks nice. Okay, ready to start? Great!

Open a new image 700 x 700 with a white background.

Open Scalloped Frame and paste as a new layer. Apply a drop shadow.

Add a new layer below the frame, using two colors from the frame make a gradient. Flood fill the layer. Select the Selection tool, draw out a rectangle on top of the frame, now go to Selections - Invert and hit delete on your keyboard.

Select a nice font and type out KISS ME, go to Effects - MuRa’s Meister - Copies - Tiling and use these settings:
Line
Tile
Blend Mode
Number -1
Shift X - 50
Shift Y - 50
Tile Gap - 2
Everything else will be default.

Move below the frame and the background layer. Position to your liking, once you have it where you like it select the background layer, go to Selections - Select All - Float - Defloat. Now select the titled text, go to Selections - Invert and hit delete on your keyboard. Lower the Opacity to 55.

Copy and paste the tube as a new layer inside the frame, erase any of the tube that’s out past the bottom of the frame. Apply a drop shadow.

Open Tag 1, resize by 60 percent. Copy and paste as a new layer. Place on the right hand side at the bottom of the frame. Apply a drop shadow.

Open the screws, select one you like and paste as a new layer. Place inside the hole on the tag. Resize if needed. Apply a drop shadow. Duplicate and place on the other side.

Open Pipe and resize by 25 percent. Copy and paste as a new layer, place on the left hand side below the tag. Apply a drop shadow.

Open Single Flower Head, resize by 40 percent. Copy and paste as a new layer. Place in the upper left hand corner on top of the frame. Apply a drop shadow.

Open Shamrock Ribbon, resize by 80 percent. Copy and paste as a new layer, place at the top of the frame behind the tube if you have the head out like I do. Apply a drop shadow.

Add a new layer above the white background, flood fill with a color or gradient from the tag. Apply the mask to this layer. Delete the mask layer and merge group. Resize if needed.

Resize all layers by 90 percent.

Add any copyrights and your name. Crop, and resize again if desired. Save as a PNG.

Thank you for trying one of my tuts, I hope you have enjoyed using it enough to see ya again! I would love to see what you have created.

Supplies Needed:
Tube of choice, I am using one by Keith Garvey who you can find now at PTE
Scrap kit Irish Vixen by 2 Irish Bitches
Template by Vicky found at Creative Misfits
Mask of choice

This tutorial is really easy and wont take long to do.

Open the template, duplicate and close the original. Delete the copyright, and layer 5. Resize all layers by 90 percent, and resize canvas by 700 x 700. Flood fill the bottom layer with white.

Select the circle layer, go to Selections - Select All - Float - Defloat.

Open a paper of choice, resize if desired, I resized mine by 70 percent. Copy and paste as a new layer above the selected layer. Position to your liking. Go to Selections - Invert and hit delete on your keyboard. Apply a drop shadow and delete the template layer.

Repeat the above steps for the remaining template layers except for the large shamrock (shape 1).

Open Clover, duplicate, resize one by 60 percent and the other by 30 percent, mirror. Copy and paste the one resized by 60 percent as a new layer. Place on top of the shamrock template layer inside the circle. Apply a drop shadow and delete the template layer. Copy and paste the smaller one that we mirrored, place in the upper left hand corner of the large rectangle. Apply a drop shadow. Duplicate and place at the top right of the large circle. Apply a drop shadow. Of course you can add any many as you like and place to your liking.

Open Clover Scatter, resize by 50 percent, flip. Copy and paste as a new layer. Place at the bottom of the tag, apply a drop shadow.

Open Street Sign and resize by 30 percent, copy and paste as a new layer. Place in the center of the circle near the top. Apply a drop shadow.

Copy and paste the tube as a new layer. Place to your liking, apply a drop shadow. If using the same tube as I did, place the pot of gold at the bottom of the tag in the center. Copy and paste the tube without the gold pot, mirror and place sitting on the pot. Apply a drop shadow to layers.

Make a gradient from two colors used in the tag, add a new layer above the white background layer and flood fill with the gradient. Apply the mask to this layer. Delete the mask layer and merge group.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

Thank you for trying one of my tuts, I hope you have enjoyed using it enough to come back for more! I would love to see what you have created.

Supplies Needed:
Tube of choice (full and close-up), I am using one by Keith Garvey found at PTE
Scrap kit O Lucky by Polka Dot Scraps
Template 57 by Kandi Kissez
Mask of choice
Xero - Porcelain (optional)

With St. Patrick’s Day right around the corner I thought I better start making some new tutorials for the occasion, well I just happened to stumble upon this awesome scrap kit freebie, so if nothing else please take a moment to check out the site, you wont be sorry, okay enough of that, ready to start? AWESOME!!

Open the template, duplicate and close the original. Delete the copyright and resize all layers by 90 percent. Resize the canvas by 700 x 700. Flood fill the bottom layer with white.

Select right green tab, go to Selections - Select All - Float - Defloat.

Copy and paste a paper of choice, I resized mine by 80 percent. Position to your liking. Go to Selections - Invert and hit delete on your keyboard. Apply a drop shadow and delete the template layer.

Repeat the above steps for the remaining template layers.

Select the double frame backgrounds, go to Selections - Select All - Float - Defloat.

Copy and paste the close-up tube as a new layer inside one of the frames, position to your liking. Apply a drop shadow. Go to Selections - Invert and hit delete on your keyboard. Still on the tube layer apply Xero - Porcelain using the default settings. Now go to Effects - Texture Effects - Blinds and use these settings:
Width - 2
Opacity - 30
Color - White
Horizontal - Checked
Light from Left/Top - Checked
Change the Blend Mode to Multiply (of course you can play around with all this using what you like and what looks best to you).

Repeat the above steps for the other frame. I mirrored my tube so I have them facing in opposite directions.

Open Frame 2, copy and paste as a new layer below the top two circles and above the bottom two circles. Position to your liking and apply a drop shadow.

Open Clover 3, duplicate, resize one by 30 percent and the other by 25 percent (this one you will go to Image - Free Rotate and rotate left 15 degrees). Copy and paste the larger one as a new layer. Place on the top left corner of the frame on the left hand side. Apply a drop shadow, duplicate, mirror and place in the lower right hand corner of the frame on the right hand side. Copy and paste the smaller one as a new layer, place in the left hand corner overlapping the larger clover. Apply a drop shadow. Duplicate, mirror and place with the clover on the right hand side. I then duplicated it again and placed it at the top of the frame on the right hand side. Duplicate once more and place behind the rotated rectangle at the top of the frame on the left hand side. If needed you can look at my tag of this gets to confusing….lol.

Open Scatter 1, resize by 60 percent, using the Freehand tool select a “bead”. Copy and paste as a new layer. Place as desired. Apply a drop shadow. Duplicate as many times as you like.

Add a new layer above the white background. Choose two colors from the tag and make a gradient. Flood fill the layer you just made with the gradient. Apply the mask to this layer. Delete the mask layer and merge group.

I also changed the color of the green used for the word art to match a color in the tube, this is totally up to you. Apply a drop shadow to the white layer word art.

Copy and paste the tube as a new layer, place in the center of the two frames. Resize if needed. I placed mine behind the two strips at the bottom (see my tag for reference if needed). I then apply Xero - Porcelain using the default settings. This is also up to you. Apply a drop shadow.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

Thank you for trying one of my tuts, I hope you have enjoyed yourself enough to come back. I would love to see what you have created.

Supplies Needed:
Tube of choice (full body and close-up), I am using one by Alehandra Vahek found at PFD
Scrap kit Lucky Me by Delicious Scraps
(click on the preview to download)
Template 221 by Denz Designz
Mask of choice

Open the template, duplicate and close the original. Delete the word art and dotted circle. Resize the canvas 700 x 700. Flood fill the background layer with white.

Select the large black circle, go to Selections - Select All - Float - Defloat.

Open a paper, resize, copy and paste as a new layer above the selected layer. Position to your liking, go to Selections - Invert. Apply a drop shadow. Delete the template layer.

Repeat the above steps for the remaining template layers.

Open Flower Frame, resize by 15 percent. Copy and paste as a new layer above the large circle. Position around the circle, apply a drop shadow.

Select the circle in the center of the template, go to Selections - Select All - Float - Defloat.

Copy and paste the close-up inside the selected circle, position to your liking, once you’re happy so to Selections - Invert and hit delete on your keyboard. Change the Opacity to Luminance (Legacy). Now go to Effects - Texture Effects - Blinds and use these settings:
Width - 2
Opacity - 30
Color - White
Horizontal - Checked
Light from Left/Top - Checked

Open Glitter Circle, resize by 10 percent. Copy and paste as a new layer. Place above the layer with the close-up tube. Position to your liking around the circle. Apply a drop shadow.

Open Leaves With Glitter, resize by 8 percent, copy and paste as a new layer. Place on the left hand side overlapping the rectangles at the bottom of the template. Apply a drop shadow. Duplicate, mirror and place at the top of the rectangles on the right hand side.

Open Glitter, resize by 12 percent. Copy and paste as a new layer. Place at the bottom of the template behind the other layers. Apply a drop shadow.

Open Leaf, resize by 8 percent, copy and paste as a new layer. Place on the right hand side overlapping the bottom of the clovers. Apply a drop shadow. Duplicate, mirror and place on the left hand side.

Open Bow 2, resize by 20 percent. Copy and paste as a new layer. Place on the left hand side on top of the square. Apply a drop shadow. Erase any of the string overlapping the tube you do not want there.

Open Flower, duplicate, resize one by 12 percent and the other by 8 percent. Copy and paste the bigger flower as a new layer. Mirror and place above the bow. Apply a drop shadow. Copy and paste the smaller flower as a new layer. Place at the bottom on the right hand side of the template. Duplicate, mirror and place at the top of the larger flower on the left hand side.

Copy and paste the tube as a new layer, resize if needed. Place behind the bottom rectangles. Erase any of the tube you do not want showing. Apply a drop shadow.

Open a paper of choice, resize by 700 x 700. Copy and paste as a new layer above the white background layer. Apply the mask to this layer. Delete the mask layer and merge group. Resize if needed.

I typed the words LUCKY ME on top of the rectangles at the bottom of the template. This is up to you, you can add something else there or add your name.

Add any copyrights and your name if you haven’t yet.

Crop, resize if desired. Save as a PNG.

Thank you for trying one of my tuts, I hope you have enjoyed it and hope to see ya back for more. I would love to see what you have created.

Supplies Needed:
Tube of choice (full body and close-up), I am using Thomas Hoover found at PTE
Scrap kit Paddy O Malley by Wicked Princess
Template 204 by Denz Designz
Mask of choice

Open the template, duplicate and close the original. Delete the copyright, resize canvas by 700 x 700. Flood fill the background layer with white.

Select the small circle 2 layer, go to Selections - Select All - Float - Defloat.

Open a paper of choice, resize 60 percent. Copy and paste as a new layer above the selected layer. Position, go to Selections - Invert and hit delete on your keyboard. Apply a drop shadow and delete the template layer.

Repeat the above steps for the remaining template layers.

Select the rectangle that’s on a angle, go to Selections - Select All - Float - Defloat.

Copy and paste the close-up tube as a new layer above the selected layer. Apply a drop shadow. Position to your liking, once you have it where you like it go to Selections - Invert and hit delete on your keyboard. Duplicate, change the Blend Mode on the bottom tube to Soft Light. Change the top tube to Luminance (Legacy). Go to Effects - Texture Effects - Blinds and use these settings:
Width - 2
Opacity - 30
Color - White
Horizontal - Checked
Light from Left/Top - Checked

Select the top thin rectangle, pick a font of choice and type out the words KISS ME. Apply a gradient glow or drop shadow. Duplicate word art and move to the right.

Open Gold and resize by 12 percent, copy and paste as a new layer. Place at the left of the word art you just added. Apply a drop shadow. Duplicate and place in the center between the two phases. Duplicate once more and place this one on the right hand side. See my tag if needed.

Open Yellow Curled Ribbon, resize by 50 percent, go to Image - Rotate Right. Copy and paste as a new layer. Place behind the rectangle with the tubes. Position to your liking, apply a drop shadow. Duplicate and position behind the rectangle with the word art. Place at the bottom right. Duplicate once more and place on the right hand side on top of the circle about in the center.

Open Double Clover, resize by 40 percent. Copy and paste as a new layer. Place at the top of the template overlapping the circle and rectangles. Apply a drop shadow. Duplicate, flip, place on the right hand side below the layers with the word art.

Open Fragipini, resize by 40 percent. Copy and paste as a new layer, place behind the clovers at the top. Apply a drop shadow. Duplicate and place behind the clovers at the bottom.

Open Bead Doodle, resize by 60 percent. Copy and paste as a new layer, place overlapping the small circle on the bottom, apply a drop shadow. Duplicate, flip, place at the top overlapping the circle and rectangle. See my tag if needed.

Copy and paste the tube as a new layer, place on the right hand side. Resize if needed. Apply a drop shadow.

Open a paper of choice, resize by 700 x 700. Paste as a new layer above the white background layer. Apply the mask to this layer. Delete the mask layer and merge group. Resize if needed.

Add any copyrights and your name.

Crop, resize if desired. Save as a PNG.

Thank you for trying one of my tuts, I hope you have enjoyed yourself enough to come back again! I would also love to see what you have created.

Supplies Needed:
Paint Shop Pro 12 or something like it
Tube of your choice, I am using one from Keith Garvey, you can find at PTE.
Tag Template 157 from Missy here.
With a little Luck scrap kit from Ellanoir here.
My supplies - here
Penta.com - Color Dot

Lets begin!

Open tag template 157, duplicate it and close the original.

Delete the copyright and heart layers.

You may resize canvas if needed.

Select the circle layer, go to SELECTIONS, select all, float, defloat.

Open paper pp18, resize 50 percent 3 times.

Paste paper as a new layer, selections - invert, hit delete on your key board.

Select done and delete the black circle layer.

Select the small thin rectangle layer, go to SELECTIONS, select all, float, defloat.

Open paper pp5, resize 50 percent 3 times.

Paste as a new layer, selections - invert, hit delete on your key board.

Select done and delete the small thin rectangle template layer.

Select the long thin rectangle layer, go to SELECTIONS, select all, float, defloat.

Open paper pp4, resize 50 percent 2 times, then 70 percent.

Paste as a new layer, selections - invert, hit delete on your key board.

Select done and delete the long thin rectangle template layer.

Select the frame background layer, go to SELECTIONS, select all, float, defloat.

Open paper pp10, resize 50 percent 2 times, then 70 percent.

Paste as a new layer, move to where you like it, selections - invert, hit delete on your key board.

Select done and delete the frame background template layer.

Select the frame layer, go to SELECTIONS, select all, float, defloat.

Open paper pp2, resize 50 percent 2 times, then 70 percent.

Paste as a new layer, selections - invert, hit delete on your key board.

Select done and delete the frame template layer.

Duplicate the circle layer, go to EFFECTS - TOADIES - What Are You? - Default settings.

Add a drop shadow to all layers except for the frame background and the circle you added the filter to.

Paste your tube as a new layer, move to where you like it and add drop shadow.

Open e17, resize 50 percent 3 times, paste as a new layer, move to the bottom of the frame, see my tag for reference if needed.

Open e28, resize 50 percent 3 times and then 70 percent again.

Open the grass, paste as a new layer, I placed mine below the frame. You may place yours wherever you like.

Open e41, resize to your liking and paste as a new layer, add a drop shadow.
Duplicate as many times as you like and place throughout your tag.

Open e26, resize 30 percent, paste as a new layer below the frame background.

Open e8, resize 20 percent then 40 percent again, paste as a new layer and place on top of the frame to the right, apply a drop shadow.

Open paper pp2, resize and paste as a new layer, apply mask WSL84, merge group, go to EFFECTS - Penta.com - COLOR DOT, apply default settings.

You may need to take your PICK tool and resize your mask some, you can also go to resize and do this.

Open word art and paste as a new layer, move into place. There is one for both sides and one for the top.

Add your copyrights and your name.

Crop if needed.

Save as a PNG.

ALL FINISHED!!

Supplies Needed:
Tube of choice, I am using the wonderful work for Keith Garvey, you can find him here
Template Smf St Pat's 1 from Creative Misfits
Scrap kit St Patty by Vicky from True Taggin Love
My supplies (bling and Word art) here

Ready to begin?
Awesome!

Open the template and duplicate it, close the original.

Resize by 700 X 700 and delete the copyright.

Select lg yellow shape layer, go to Selections - Select All - Float - Defloat - Invert

Open a paper of choice, I used pp2 and paste as a new layer above the yellow shape. Position to your liking, hit delete on your key board. Apply a drop shadow. Delete the template layer.

Select green rect layer, go to Selections - Select All - Float - Defloat - Invert

Open a paper of choice, I used pp1 and paste as a new layer above the layer selected. Position to your liking, hit delete on your key board. Apply a drop shadow. Delete the template layer.

Select one of the sm yellow rectangles, go to Selections - Select All - Float - Defloat - Invert

Open a paper of choice, I used pp2 and paste as a new layer above the layer selected. Position to your liking, hit delete on your key board. Apply a drop shadow. Delete the template layer.

Repeat above step for the remaining small rectangle.

Apply a drop shadow to the Glittered Rectangle and the Clover Cluster.

Duplicate clover cluster, flip.

Copy and paste your tube as a new layer, position to your liking and add a drop shadow.

Apply a drop shadow to both of the dotted layers.

Open shamrock dangle and resize by 60 percent. Paste as a new layer and move to the top right of the large rectangle. Apply a drop shadow. See my tag for reference if needed.

Open flower3, resize by 30 percent and paste as a new layer. Move to the top of the dangle. Apply a drop shadow.

Open flower5, resize by 25 percent and paste as a new layer. Position overlapping the flower you just placed. Apply a drop shadow. See my tag for reference if needed.

Open flower5, resize by 30 percent and paste as a new layer. Move to the left of your tag, apply a drop shadow. Duplicate flower5 and place overlapping the flower you just added.

Open paper1 and paste as a new layer above your white background. Apply your mask to this, merge.

Open and paste the cheers word art as a new layer. Move so that its below your tube layer and rainbow. Position in the center of the rectangle behind your tube. See my tag for reference if needed.

Open and paste the bling as a new layer. I moved mine above the large rectangle. Apply a drop shadow.

Add your copyright and name.

Crop, and resize if desired.

Save as a PNG.

You are all finished!!

I would love to see what you have made using one of my tuts!!

Supplies Needed:
Tube of choice, I am using one from the very talented Anna Marine, you can find her work here.
Scrap kit With A Little Luck by Felice at Felice Original
Mask WSL_84 by Chelle.

Don't forget to save your work often!

All set?
Wonderful!

Open a new image 700 x 700 with a white background.

Open FrameShamrocks, resize by 70 percent and paste as a new layer.

Take your magic wand and click inside the frame, go to Selections - Modify - Expand by 12, invert.

Open a paper of choice, I used lilShamrock and resized by 70 percent. Paste as a new layer below your frame. Hit delete on your key board.

Open your tube and paste as a new layer. I allow fer head to stick out past the frame. Position wherever you like and delete anything that is below the frame. Apply a drop shadow to your tube and frame layers.

Open HorseShoe, resize by 80 percent and paste as a new layer on top of the frame. See my tag for reference of needed. Apply a drop shadow.

Open GoldCoins, resize by 50 percent, Select some coins and paste to your liking on your tag. See my tag for reference if needed. Apply a drop shadow. Duplicate if desired and place throughout your tag.

Open PotOfGold, resize to your liking, paste as a new layer behind your tube but to one side so you can still see it. Apply a drop shadow. I then selected a few of the coins from the bottom of the pot and pasted them at various places on the bottom of my tag. See my tag for reference if needed.

Open Hat, resize 30 percent and paste as a new layer. Move to your liking, I placed mine on top of the bow, but you can place yours wherever you like...its your tag! LOL. Apply a drop shadow.

Open Clover, resize to your liking and paste as a new layer. I placed mine on the horseshoe frame. Add a drop shadow and duplicate, mirror and place on other side.

Open a paper of your choice and paste as a new layer above your white background layer, apply the mask to this layer, merge. Resize if needed.

With my mask layer highlighted, I went to Effects, Textures, and used Mosaic Antique with these settings:
Grid Settings (both) 58
Symmetic checked
Tile Diffusion - 58
Grout Width - 2
Grout Diffusion - 48

Add any other elements you may wish.

Add copyrights and your name.

Crop, and resize if desired.

Save as a PNG.

You are all finished!!

I would love to see what you have made with one of my tuts :)

Supplies Needed:
Tube of chioce (small and close-up), I am using one of Elias Chatzoudis found PTE.
Template 180 from Missy here
Scrap Kit Green from Bea Creations found here
My Supplies (word art) here.

Lets get started!

Open the template from Missy, duplicate and close the original.
Size to 700x700 to give us working space, you can resize later if needed.

Select circle 1, go to select all, float, defloat.
Paste a paper of your choice or use paper 06 and paste as a new layer, invert and delete, delete template layer.

Select circle 2 and repeat steps above.

Select the circle background (inside of the frames we just did), go to select, select all, float, defloat, paste a paper as a new layer, invert and delete, delete template layer.

Paste your close-up tube as a new layer, place this below your largest frame.
Delete anything at sticks out from the frame on the bottom, I left the top of the hat but this is totally up to you.

Drop shadow your tube and large frame.

Select your smaller frame and paste tube again, you may want to mirror your tube so it faces in a different direction. Paste below your small frame and delete anything you don't want sticking out. I selected the inside of the frame, selects and expand by 4, invert and click on your tube layer and delete.

Drop shadow both the tube and your frame layers.

Apply luminance legency to both tube layers or use something you like, this is where you can play around...LOL

Select the circle layer (the grey circle at the very bottom), select, select all, float, defloat, and paste a paper as a new layer, I used paper 08, invert and delete, delete template layer. Add a drop shadow.

Select thin rectangle 1, go to select, select all, float, defloat and paste a paper as a new layer, I used paper 09, invert and delete, delete template layer. Apply a drop shadow.

Select the thin rectangle 2, go to select, select all, float, defloat and paste a paper as a new layer, I used paper 10, invert and delete, delete template layer. Apply drop shadow.

Paste your smaller tube as a new layer and position, add a drop shadow.

Now for the elements, you can either add the elements you like or you can use the ones as I did below:

Open decor 11 and resize 70 percent, paste as a new layer and move to the right top corner, duplicate, mirror, flip and position where you like it. Add a drop shadow to both layers.

Open bling and resize by 70 percent, paste on top of the large frame near the  bottom, see my tag for reference if needed. Add a drop shadow.

Open flower12, resize by 50 then by 70 percent, paste as a new layer on top of the large frame, move to the bottom left. See my tag for reference if needed. Drop shadow flower.

Duplicate and move to the other side of tag, see my tag for reference.

Open flower10, resize by 50 percent twice, paste as a new layer on top of flower12, move down to where it is just operlapping, apply a drop shadow. Duplicate and move to the right overlapping the other flower12. See my tag for reference if needed.

Open decor10, resize by 70 percent, paste as the bottom of your tag, see my tag for reference, drop shadow and duplicate, flip and move to the top of the large frame.

Duplicate decor 10 again and paste on the other side if your tube, you may need to mirror and/or flip layer until you have it where you like it. See my tag again if needed.

Open button1 and paste to the top right of your tube, drop shadow.

Add your copyrights and name.

Crop if needed.

Save as a PNG.

All Finished!!

Hope you had fun and I would love to see what you created using my tut!

Supplies Needed:
Tube of choice, I am using the ever so talented Ismael Rac, you can find his work here.
Template 10 by Mincrisar found at Creative Misfits Creations.
Scrap kit Paddy O Malley by Wicked Princess found here

All Set?
GREAT!!

Open the template, duplicate and close the original.

Delete the copyright layer.

Select frame 2, go to Selections - Select All - Float - Defloat - Invert.

Open a paper of choice, I used PP11, paste as a new layer above your selected frame. Position to your liking and hit delete on your keyboard. Apply a drop shadow. Delete the template layer.

Select rect, go to Selections - Select All - Float - Defloat - Invert.

Choose a color from your tube, add a new layer above your selected rectangle, flood fill with your color.

Select back, go to Selections - Select All - Float - Defloat - Invert.

Open a paper of choice, I used PP2, paste as a new layer above your selected frame. Position to your liking and hit delete on your keyboard. Apply a drop shadow. Delete the template layer.

Select frame 1, go to Selections - Select All - Float - Defloat - Invert.

Open a paper of choice, I used PP8, paste as a new layer above your selected frame. Position to your liking and hit delete on your keyboard. Apply a drop shadow. Delete the template layer.

Add a drop shadow to the clover layer.

Select mask, go to Selections - Select All - Float - Defloat - Invert.

Add a new layer above the mask layer and flood fill will a gradient from your tube. I had to make sure Use All Layers was checked. Apply a small drop shadow. Delete the template layer.

Select the word art, go to Selections - Select All - Float - Defloat - Invert.

Open your tube, resize if needed, position inside the frame. Delete anything that sticks out past the bottom or sides. Apply a drop shadow.

Open a paper of choice, I used PP12, paste as a new layer above your selected frame. Position to your liking and hit delete on your keyboard. Apply a drop shadow. Delete the template layer.

Open GoldCloverCharm, resize by 30 percent and paste as a new layer. Position on right side of the word art. Apply a drop shadow.

Open YellowCurlyRibbon, resize by 60 percent and paste as a new layer. Position to the left of your frame with your tube. Delete parts of the ribbon so it looks "wrapped" around the frame. Apply a drop shadow.

Open Dust, paste as a new layer, position at the bottom of the tag, duplicate, mirror and flip.

Add another other elements you like.

Add copyrights and name.

Crop, resize if desired.

Save as a PNG.

Finished!! How easy was that...LOL

I would love to see what you have made using one of my tuts. Just email me that tag and I will add it to our site. Please include any links you would like to be added as well.

Supplies Needed:
Paint Shop Pro 12 or something like it.
Tube of choice, I am using one from Ismael Rac, you can find them here.
(I am using 2 different size tubes)
Lacarolita Template #6 here.
With A Little Luck Scrap Kit from Bits N Bobs found here
Penta.com - Color Dot
WSL mask4 or one of your own.
My Supplies - here (word art and mask).

Don't forget to save often!

Lets begin!
Open up the template, resize canvas 700 by 700 to give up some room to work.

Delete the credits (top layer).

Select raster 1, go to select all, float, defloat.

Choose a paper to your liking (I used paper4), paste as a new layer, go to invert and hit delete on your key board.

Delete the template copy.

Repeat the above steps until you have all the template layers replaced with papers.

On the inside frame layer I applied Penta.com - Color Dot on default settings.

Once you are finished with the papers apply drop shadows to all layers except for the papers inside the frames.

Open your larger (close up) tube and paste as a new layer below your frame layer.

Delete anything that sticks out from the frame.

Repeat this for the remaining 2 frames using different parts of your tube.

Apply a drop shadow to the tube layers.

I changed my blend mode to Luminance (legacy) on all tube layers, you can mess around with this and see what you like best.

Time to add the mask, make a gradient from your tube or the papers used in the template.

I used 2 colors from my frame.

Set Angle to 45 and Repeat to 2.

Add a new layer above the white background, flood fill this layer with your gradient.

Apply mask, and merge group when done.

I resized my mask a little bit, you may need to do this also depending on what mask you used.

Open up your smaller tube and paste it as a new layer, move to where you like it, apply a drop shadow.

Now we are going to add the elements.

You can either add your own or use the ones I did below.

Open WALL4 and resize by 50 percent, paste above the mask layer and move to the left top corner, see my tag for reference of needed.

Duplicate this layer and move to the right lower corner.

Open WALL2 and resize by 50 percent and paste as a new layer, flip and move to the lower left corner, drop shadow.

Duplicate and move to the upper right corner, drop shadow.

Open WALL1 and resize 60 percent, paste as a new layer and move to the bottom left, see my tag for reference if needed, drop shadow.

Duplicate, mirror and flip the flower layer (WALL1).

Open WALL16, resize and paste as a new layer, move to your liking, duplicate as many as you want and place at different places.

Paste the word art as a new layer, move to were you like it, or place at the bottom like I did.

Add copyrights and your name

Crop if needed and save as a PNG.

ALL FINISHED!!